DUOTACK® SPF ADHESIVE SKU: A904
DUOTACK® SPF ADHESIVE SKU: A904
DUOTACK SPF ADHESIVE is a low-pressure, two-component spray polyurethane foam adhesive formulated for adhering SENTINEL HFB (Heavy Fleece-Backed) PVC membranes, rigid insulation and coverboards to approved substrates. DUOTACK SPF ADHESIVE comes in a kit containing both the A & B components, a 25 ft hose, an application gun and 10 replacement nozzles.
Product Properties
- Overlying Material PVC Membrane
- Overlying Material Coverboard, Insulation
Installation
DUOTACK SPF ADHESIVE should be applied to approved substrates free of oil, grease and other contaminants.
Fleece-backed PVC Installation: To adhere SENTINEL HFB membranes, DUOTACK SPF ADHESIVE should be applied using a spatter application. Apply the adhesive at approximately 3,000 square ft per kit. The membrane is then rolled and broomed into place prior to curing.
Rigid Insulation and Coverboard Installation: Apply DUOTACK SPF ADHESIVE in a ribbon pattern. Ribbons should be 2.5 to 3.5 in wide and spaced a maximum of 12 in on center (O.C.) Applying ribbons at 12 in O.C. yields approximately 3,500 sq ft per kit. Once the adhesive has adequately cured, place the insulation/coverboard and walk into place. Product open time can vary depending on ambient air and substrate temperatures.
Testing & Approvals
Related Products
ELASTOPHENE® LS FR GR
ELASTOPHENE LS FR GR (low slope, fire retardant, granulated) is an SBS-modified bitumen cap ply for use in approved multi-ply…
View Product
ELASTOPHENE® FLAM FR GR
ELASTOPHENE® Flam FR GR (fire retardant, granulated) is an SBS-modified bitumen cap ply for use in approved multi-ply membrane and…
View Product
SOPREMA Industrial XL Gutter
SOPREMA Industrial XL Gutter is the largest gutter system that is engineered and tested to meet the requirements of the…
View ProductRelated Projects
Asian Health & Services Center – Portland, Oregon
Flores De La Playa Condominium – Satellite Beach, Florida
When selecting a product to re-roof the building after the storm, it was important to select a product that would be able to withstand the impact of future tropical storms and hurricanes. The system that was selected included a base ply of ELASTOPHENE® SP 3.0 with 350 PSI lightweight concrete applied on top and SOPRALENE® 180 PS 3.0 with a cap sheet of SOPRALENE Flam 180 FR GR.