SOPREMA

Search

ELASTOPHENE® FLAM 2.2 SKU: 00390

ELASTOPHENE® FLAM 2.2 SKU: 00390

ELASTOPHENE® Flam 2.2 is an SBS-modified bitumen base ply for use in approved multi-ply membrane and flashing assemblies. ELASTOPHENE Flam 2.2 is composed of a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer modified bitumen and is reinforced with a high quality random glass fiber mat. The topside and underside are surfaced with polyolefin burn-off film to optimize heat welding.

Product Properties

  • ASTM ASTM D6163
  • Component Base
  • Installation Method Heat Welded
  • Reinforcement Glass Fiber
  • Thickness 87 mils (2.2 mm)
  • Topside Burn Off Film
  • Underside Burn Off Film

Installation

Prior to installation, unroll ELASTOPHENE Flam 2.2 onto the roof surface and allow to relax. Position ELASTOPHENE Flam 2.2 in desired position and back roll the product. ELASTOPHENE Flam 2.2 is then heat welded to approved substrates. Subsequent approved inter-ply or cap ply membranes are applied to ELASTOPHENE Flam 2.2 via heat welding. Refer to the SOPREMA® SBS Roofing Manual for additional application guidelines.

 

Testing & Approvals

Related Products

ALSAN TRAFIK PU 420

ALSAN Trafik PU 420 is a two-component, fast setting, aromatic polyurethane elastomeric topcoat. This topcoat provides excellent adhesion to SOPREMA…

View Product

SOPRANATURE® Metal Edging

SOPRANATURE METAL EDGING is made of aluminum 5052-H32, 0.051 in (16 ga.), mill finish. It is “L” shaped, 8 ft…

View Product

ELASTOPHENE® HS SANDED

ELASTOPHENE HS Sanded (high strength) is an SBS-modified bitumen base ply for use in approved multi-ply membrane and flashing assemblies….

View Product

Related Projects

Parkland Hospital – Dallas, Texas

The new hospital featured flat rooftops at multiple levels that all needed to be made watertight for decades to come. The roofing system needed to be designed in a way that accounted for a helipad, consistent rooftop traffic, extensive rooftop equipment, lightwells and various utility platforms. A lot stood in the way of Anchor Roofing, the installer, but the meticulous planning for the project meant that all contingencies had been considered by the time application of the waterproofing system began.

Chinese Hospital Outpatient Center – San Francisco, California

SOPREMA’s SENTINEL line was the product of choice for this project because of its proven quality, competitive pricing and superior technical support. Platinum Roofing, the contractor for the project, utilized SENTINEL G150, SENTINEL H2O Bonding Adhesive, SENTINEL VCM, and SENTINEL Prefabricated Corners and Pipe Flashings to complete the roof.