SOPREMA

Search

ELASTOPHENE® FLAM HR 3.0 SKU: 00252

ELASTOPHENE® FLAM HR 3.0 SKU: 00252

ELASTOPHENE® Flam HR 3.0 (high resistance) is an SBS-modified bitumen base ply for use in approved multi-ply membrane and flashing assemblies. ELASTOPHENE Flam HR 3.0 is composed of a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer modified bitumen and is reinforced with high performance glass scrim. The topside and underside are surfaced with polyolefin burn-off film to optimize heat welding.

Product Properties

  • ASTM ASTM D6163
  • Installation Method Heat Welded
  • Reinforcement Glass Scrim
  • Thickness 120 mils (3.0 mm)
  • Topside Burn Off Film
  • Underside Burn Off Film

Installation

Prior to installation, unroll ELASTOPHENE Flam HR 3.0 onto the roof surface and allow to relax. Position ELASTOPHENE Flam HR 3.0 in desired position and back roll the product. ELASTOPHENE Flam HR 3.0 is then heat welded to approved substrates. Subsequent approved inter-ply or cap ply membranes are applied to ELASTOPHENE Flam HR 3.0 via heat welding. Refer to the SOPREMA SBS Roofing Manual for additional application guidelines.

 

Testing & Approvals

Related Products

SOPRA-XPS 40

SOPRA-XPS 40 is a rigid thermal insulation board made of high-density extruded polystyrene with squared edges on its four sides….

View Product

SENTINEL® T-Joint Patches

SENTINEL® T-Joint Patches are made using 60 mil, reinforced SENTINEL P150 membrane. SENTINEL T-Joint Patches are supplied as 4.5 inch…

View Product

SOPRANATURE® GEONET

SOPRANATURE GEONET is composed of a high-density polyethylene geonet drainage core heat fused to a non-woven filter fabric. The integrated…

View Product

Related Projects

Indiana War Memorial – Indianapolis, Indiana

The Indiana War Memorial has had leak issues since its construction in 1924. The leak issues were addressed by using SOPREMA’s ALSAN® TRAFIK HP and SOPRALENE® Flam 180 & 250 membranes. The Memorial is no longer leaking.

Placer County Water Agency – Auburn, California

In 2015, the Placer County Water Agency took on a tear-off roofing project, in which SOPREMA products were used. SOPREMA was the right choice for this project because the breadth of products met the designer’s needs, including meeting California Title 24 energy efficiency standards with the use of ENERGY STAR® rated SOPRASTAR® Flam. Another appealing aspect was the versatility of SENTINEL® P150, which allowed coverage for the vertical walls throughout the roofing system.