SOPREMA

Search

ELASTOPHENE® HR SANDED 3.0 SKU: 00213

ELASTOPHENE® HR SANDED 3.0 SKU: 00213

ELASTOPHENE HR Sanded 3.0 (high resistance) is an SBS-modified bitumen base ply for use in approved multi-ply membrane and flashing assemblies. ELASTOPHENE HR Sanded 3.0 is composed of a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer modified bitumen and is reinforced with high performance glass scrim. The topside and underside are surfaced with fine mineral aggregate to facilitate cold adhesive application.

Product Properties

  • ASTM ASTM D6163
  • Component Base
  • Installation Method Cold Adhered, Asphalt Adhered
  • Reinforcement Glass Scrim
  • Thickness 120 mils (3.0 mm)
  • Topside Sanded
  • Underside Sanded

Installation

Prior to installation, unroll ELASTOPHENE HR Sanded 3.0 onto the roof surface and allow to relax. Place ELASTOPHENE HR Sanded 3.0 in desired position and back roll the product. Apply approved cold adhesive following manufacturer specifications. ELASTOPHENE HR Sanded 3.0 is then rolled into the cold adhesive and subsequently rolled with a weighted roller. Subsequent approved inter-ply or cap ply membranes are applied to ELASTOPHENE HR Sanded 3.0 via cold adhesive. Refer to the SOPREMA SBS Roofing Guide for additional application guidelines.

 

Testing & Approvals

Related Products

ALSAN® RS TEXTURED COATING

ALSAN RS Textured Coating is a rapid-setting, proprietary formulation polymethyl methacrylate (PMMA) liquid resin with integrally mixed aggregate. ALSAN RS…

View Product

SENTINEL® P200 HFB

SENTINEL® P200 HFB is a high performance, polyester reinforced, thermoplastic polyvinyl chloride (PVC) roof membrane, specially designed to provide unmatched…

View Product

ACOUSTIBOARD

The ACOUSTIBOARD panel elimiates the need for the 1 1/2 inch concrete covering that is usually poured over wood structures,…

View Product

Related Projects

Northeast Louisiana State Office Building – Monroe, Louisiana

As an approved manufacturer for the State of Louisiana, the decision makers at the Facility Planning and Control Department were assured that the products installed offered unsurpassed quality. The final assembly was designed to meet FM Approvals 1-90 wind uplift test and proves to protect the building for many years to come.

Strongsville Starbucks®- Strongsville, Ohio

Roof Rite, the roofing contractor on the job, brought SOPREMA products into the mix based on the wide product selection and proven past performance.