ALSAN® RS COLOR ADDITIVE
ALSAN® RS COLOR ADDITIVE
ALSAN RS COLOR ADDITIVE is mixed with ALSAN RS 285 CF, ALSAN TRAFIK RS 789 LT and ALSAN TRAFIK RS 787 CF unpigmented resins. ALSAN RS COLOR ADDITIVE is supplied in pre-measured 1.5 kg pouches.
Product Properties
- Installation Method 2 Part
- Material Liquid
- Material PMMA
Installation
One pouch of ALSAN RS COLOR ADDITIVE is required for each container of ALSAN liquid resin. The ALSAN liquid resin should be thoroughly mixed before adding the color additive. Using a slow-speed (200-400 rpm) mechanical agitator, mix the liquid resin for 2-5 minutes. Next, add the entire contents of ALSAN RS COLOR ADDITIVE to the liquid resin and continue mixing for 2-5 minutes until uniform streak-free color is achieved.
NOTE: Combining the color additive to ALSAN RS and ALSAN TRAFIK RS resins does not affect pot life or cure time of the product.
Testing & Approvals
Related Products
SOPREMA Industrial XL Gutter
SOPREMA Industrial XL Gutter is the largest gutter system that is engineered and tested to meet the requirements of the…
View Product
TRI-FIXX™ FASTENING SYSTEM
The TriFixx™ Fastening System is a plate/nail combination that is utilized for mechanically attaching SOPREMA™ membranes to lightweight insulating concrete…
View Product
COLPHENE® BSW H
COLPHENE BSW H is an SBS-modified bitumen waterproofing membrane for use in approved blind side/under slab waterproofing assemblies. COLPHENE BSW…
View ProductRelated Projects
American Airlines Center – Dallas, Texas
On March 21, 2022, a leaky roof on Dallas' American Airlines Center delayed the start of an NBA game between the hometown Mavericks and the Minnesota Timberwolves, and after the issue surfaced again a couple months later to interfere with a Mavs playoff game, quick action was needed to replace the building's 20-year-old roof.
Cleveland Museum of Art – Cleveland, Ohio
This $350 million project was the largest cultural project in Ohio’s history. SOPREMA’s SOPRALENE® Flam 180 polymer modified bitumen two-ply system was installed. SOPREMA was the ideal manufacturer for the project as they were able to provide a variety of quality products to accommodate the projects’
needs with a single source warranty.