SOPRALENE® 180 SANDED 2.2 SKU: 00568
SOPRALENE® 180 SANDED 2.2 SKU: 00568
SOPRALENE 180 Sanded 2.2 is an SBS-modified bitumen base ply for use in approved multi-ply membrane and flashing assemblies. SOPRALENE 180 Sanded 2.2 is composed of a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer modified bitumen and is reinforced with a tough, dimensionally stable non-woven polyester mat. The topside and underside are surfaced with fine mineral aggregate to facilitate cold adhesive application.
Product Properties
- ASTM ASTM D6164
- Component Base
- Installation Method Cold Adhered, Asphalt Adhered
- Reinforcement Polyester
- Thickness (minimum) 87 mils (2.2 mm)
- Thickness (nominal) 94 mils (2.4 mm)
- Topside Sanded
- Underside Sanded
Installation
Prior to installation, unroll SOPRALENE 180 Sanded 2.2 onto the roof surface and allow to relax. Place SOPRALENE 180 Sanded 2.2 in desired position and back roll the product. Apply approved cold adhesive following manufacturer’s guidelines. SOPRALENE 180 Sanded 2.2 is then rolled into the cold adhesive subsequently rolled with a weighted roller. Subsequent approved inter-ply or cap ply membranes are applied to SOPRALENE 180 Sanded 2.2 via cold adhesive. Refer to the SOPREMA® SBS Roofing Guide for additional application guidelines.
Testing & Approvals
Related Products
COLPHENE® LM BARR Spray
COLPHENE LM BARR Spray is a single component, 95% solids content, liquid applied, moisture curing elastomeric waterproofing membrane. COLPHENE LM…
View Product
COLPHENE® STICK
COLPHENE® Stick SBS-modified bitumen, self-adhered base ply reinforced with a tough, dimensionally stable nonwoven polyester mat. A fine mineral aggregate on the topside facilitates self-adhered and cold-adhesive applications.
View Product
2-1 SOPRASMART ISO HD
2-1 SOPRASMART HD is a high performance panel of an SBS-modified bitumen base membrane and high density polyisocyanurate insulation board….
View ProductRelated Projects
CSU Maritime Academy – Vallejo, California
California Maritime Academy chose SOPREMA®’s SOPRALENE® SG cap sheet because it meets Title 24 cool roof standards. The California Energy Commission’s Title 24 Energy Efficiency Standards for Residential and Nonresidential Buildings establishes prescriptive requirements for cool roof materials in new construction or major re-roofing projects.
Holiday Inn Express – Medina, Ohio
SOPREMA®’s SOPRASEAL® Stick VP self-adhered vapor-permeable air barrier membrane was installed to ensure a continuous air barrier with no moisture infiltration for this wall assembly requiring a “breathable” characteristic. It creates a solid barrier against air infiltration and exfiltration, which minimizes associated energy loss and condensation problems.