SOPRALENE® 250 SANDED SKU: 00231
SOPRALENE® 250 SANDED SKU: 00231
SOPRALENE 250 Sanded is an SBS-modified bitumen base ply for use in approved multi-ply membrane and flashing assemblies. SOPRALENE 250 Sanded is composed of a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer modified bitumen and is reinforced with tough, dimensionally stable non-woven polyester mat. The topside and underside are surfaced with fine mineral aggregate to facilitate cold adhesive application.
Product Properties
- ASTM ASTM D6164
- Component Base
- Installation Method Cold Adhered, Asphalt Adhered
- Reinforcement Polyester
- Thickness (minimum) 150 mils (3.8 mm)
- Thickness (nominal) 157 mils (4.0 mm)
- Topside Sanded
- Underside Sanded
Installation
Prior to installation, unroll SOPRALENE 250 Sanded onto the roof surface and allow to relax. Place SOPRALENE 250 Sanded in desired position and back roll the product. Apply approved cold adhesive following manufacturer specifications. SOPRALENE 250 Sanded is then rolled into the cold adhesive and subsequently rolled with a weighted roller. Subsequent approved inter-ply or cap ply membranes are applied to SOPRALENE 250 Sanded via cold adhesive. Refer to the SOPREMA SBS Roofing Guide for additional application guidelines.
Testing & Approvals
Related Products
INSONOMAT
INSONOMAT is an acoustic membrane made with a base of elastomeric bitumen and recycled rubber. INSONOMAT was developed specifically for…
View Product
SOPRALENE® FLAM 250 FR GR
SOPRALENE® Flam 250 FR GR (fire retardant, granulated) is an SBS-modified bitumen cap ply for use in approved multi-ply membrane…
View Product
ALSAN® RS 260 LO FIELD
ALSAN RS 260 LO FIELD is a high-performance, low odor, rapid-setting, polymethacrylate (PMA) liquid resin. ALSAN RS 260 LO FIELD…
View ProductRelated Projects
Denver Union Station – Denver, Colorado
When the Denver Union Station was to go through a remodel, SOPREMA’s COLPHENE® BSW product was selected to waterproof the building.
In 2011, SOPREMA met the challenges of waterproofing the building envelope with the COLPHENE BSW system to ensure a seamless watertight solution. Over 170,000 sq ft of COLPHENE BSW was used as a waterproofing membrane.
Fayetteville Area System of Transit Multimodal Project – Fayetteville, North Carolina
The original design selected for the center left the project over budget, so the contractor and architect had to go back to the drawing board. After researching additional options, both Baker Roofing and Gantt Huberman Architects felt very comfortable with SOPREMA’s proven history and the ability to meet the Buy American requirement, so they selected the SENTINEL® line for the project.