SOPRA-XPS 20

SOPRA-XPS 20
SOPRA-XPS 20 is a rigid thermal insulation board made of extruded polystyrene. It is composed of closed cell foam. It is mainly used as thermal insulation for above grade SOPREMA wall systems and on the inside of foundation walls. It can also be used for residential applications on exterior foundation walls and under concrete slabs. Compliant with ASTM C578-14, Type X.
Product Properties
- Material Extruded Polystyrene
Installation
MECHANICALLY ATTACHED
• Install insulation boards using fasteners and 2 in (50 mm) diameter plates
• Install fasteners at 6 in (150 mm) on board perimeter and at 12 in (305 mm) o.c. horizontally and vertically
• When installing multiple layers of SOPRA-XPS, all joint should be staggered between layers
Related Products
SOPRA-XPS 25 CW
SOPRA-XPS 25 CW is a thermal insulation boards made of rigid extruded polystyrene with square edges on its four sides….
View Product
ALSAN TRAFIK PU 211
ALSAN Trafik PU 211 is a single-component, polyurethane elastomeric basecoat. This basecoat provides excellent adhesion to SOPREMA polyurethane system topcoats…
View Product
SENTINEL® COPPER ART VINYL COATED METAL
SENTINEL® VCM is a 24 gauge (0.6 mm) galvanized metal sheet with a 20 mil SENTINEL PVC membrane laminated to…
View ProductRelated Projects
Perry Monument – Put-in-Bay, Ohio
At 352-feet, it is among the tallest monuments. The world’s most massive Doric column was constructed by a multi-state commission from 1912 to 1915 “to inculcate the lessons of international peace by arbitration and disarmament”.
Museum of the American Revolution – Philadelphia, Pennsylvania
Multiple SOPREMA products ranging from ELASTOPHENE® Flam to the SOPRANATURE® vegetated roofing system were used to complete this project. The Museum of the American Revolution is unique in the fact that it has an exposed SBS roof membrane, extensive vegetated roofs, terrace roofs with pavers and even has some vegetated wall systems. The building resembles 1800’s architecture with a modern flare.