SOPRAFIX® #14 MP FASTENER
SOPRAFIX® #14 MP FASTENER
SOPRAFIX® #14 MP (Multi Purpose) Insulation Fasteners are designed for the attachment of insulation and membrane to steel (18-22 ga.), wood, and structural concrete.
Product Properties
- Fastening Substrate Concrete, Steel, Wood
- Type Fastener
Installation
To meet FM requirements, the fastener must penetrate the steel deck ¾” inch. Minimum penetration is 1” inch into wood, ¾” inch through wood that is less than ¾” inch thick and 1 ¼” inch into concrete. When installing in concrete, pre-drill using a 7/32” inch drill bit and drill pilot hole ½” inch deeper than the required embedment. Install the fastener using a clutch-driven drill motor with a maximum 1500 RPM.
Testing & Approvals
Related Products
SOPREMA® Modified Drip Edge
SOPREMA® Modified Drip Edge is engineered with an interlocking, concealed splice plate designed to prevent splice plate migration under the…
View Product
COLVENT™ 180 TG
COLVENT 180 TG is a partially-adhered, heat welded elastomeric modified bitumen base ply for use in approved multi-ply membrane and…
View Product
INSONO AF3-90
INSONO AF3-90 is composed of self-adhesive elastomeric bitumen with an exposed non-woven polyester reinforcement. The underside is surfaced with a…
View ProductRelated Projects
CSU Maritime Academy – Vallejo, California
California Maritime Academy chose SOPREMA®’s SOPRALENE® SG cap sheet because it meets Title 24 cool roof standards. The California Energy Commission’s Title 24 Energy Efficiency Standards for Residential and Nonresidential Buildings establishes prescriptive requirements for cool roof materials in new construction or major re-roofing projects.
San Francisco War Memorial – San Francisco, California
SOPREMA’s advanced PMMA membrane system, ALSAN® RS 230 was chosen for waterproofing this international landmark because of the ease of installation in tight areas and short time schedule.