SOPREMA

Search

SOPRAFIX® BASE 612 SKU: 00425

SOPRAFIX® BASE 612 SKU: 00425

SOPRAFIX BASE 612 is an SBS-modified bitumen membrane designed specifically for mechanical attachment to approved roof decks. SOPRAFIX BASE 612 is reinforced with a tough, dimensionally stable non-woven polyester mat that is saturated and coated on both sides with a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer modified bitumen.

Product Properties

  • ASTM ASTM D6164
  • Component Base
  • Installation Method Mechanically Attached
  • Reinforcement Polyester
  • Thickness (minimum) 110 mils (2.8 mm)
  • Thickness (nominal) 118 mils (3.0 mm)
  • Topside Burn Off Film
  • Underside Burn Off Film

Installation

Prior to installation, unroll SOPRAFIX BASE 612 onto the roof surface and allow to relax. Place SOPRAFIX BASE 612 in desired position. SOPRAFIX BASE 612 is mechanically fastened through the side laps using the appropriate fastener. Subsequent approved inter-ply or cap ply membranes are applied to SOPRAFIX BASE 612 via heat welding.

 

Testing & Approvals

Related Products

COLPHENE® 180 SANDED

COLPHENE® 180 Sanded is an SBS-modified bitumen base ply reinforced with a tough, dimensionally stable nonwoven polyester mat. The topside and underside are surfaced with fine mineral aggregate to facilitate cold adhesive application.

View Product

COLPHENE® BSW H

COLPHENE BSW H is an SBS-modified bitumen waterproofing membrane for use in approved blind side/under slab waterproofing assemblies. COLPHENE BSW…

View Product

COLPHENE® 180 PS

COLPHENE® 180 PS (polyolefin, sanded) is an SBS-modified bitumen base ply for use in approved multi-ply membrane waterproofing assemblies.

View Product

Related Projects

Strongsville Starbucks®- Strongsville, Ohio

Roof Rite, the roofing contractor on the job, brought SOPREMA products into the mix based on the wide product selection and proven past performance.

CSU Maritime Academy – Vallejo, California

California Maritime Academy chose SOPREMA®’s SOPRALENE® SG cap sheet because it meets Title 24 cool roof standards. The California Energy Commission’s Title 24 Energy Efficiency Standards for Residential and Nonresidential Buildings establishes prescriptive requirements for cool roof materials in new construction or major re-roofing projects.