SOPREMA

Search

SOPRALAP™ SANDED SKU: 04034

SOPRALAP™ SANDED SKU: 04034

SOPRALAP SANDED is an SBS-modified bitumen cover strip for use with SOPRASMART Laminated Board products. SOPRALAP SANDED is reinforced with a tough, dimensionally stable composite polyester/glass fiber reinforcement that is saturated and coated on both sides with a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer modified bitumen.

Product Properties

  • Type Stripping

Installation

Prior to installation, unroll SOPRALAP SANDED onto the roof surface and allow to relax. SOPRASMART Laminated Board are butted end to end, with a membrane overlap of
1 inch. Place SOPRALAP SANDED in desired position, centered over the board joint, and back roll the product. Apply approved cold adhesive following manufacture’s guidelines. SOPRALAP SANDED is then rolled into the cold adhesive and subsequently rolled with a weighted roller.

 

Related Products

COLPHENE® SP 2.2

COLPHENE® SP 2.2 (sanded, polyolefin) is (SBS) polymer-modified bitumen reinforced with a high-quality random glass fiber mat. The topside is covered with fine mineral aggregate. The underside is surfaced with polyolefin burn-off film.

View Product

SENTINEL® MOLDED INSIDE CORNERS

SENTINEL® Molded Corners are injection molded, unreinforced flashings that are installed to flash 90-degree inside and outside corners. SENTINEL PVC…

View Product

POLYFLEECE

Polyfleece is a proprietary non-woven polyester reinforcement used in the following waterproofing and flashings: ALSAN Flashing, ALSAN Coating AC 401,…

View Product

Related Projects

San Francisco War Memorial – San Francisco, California

SOPREMA’s advanced PMMA membrane system, ALSAN® RS 230 was chosen for waterproofing this international landmark because of the ease of installation in tight areas and short time schedule.

ANB Bank – Denver, Colorado

When the Denver ANB Bank was to go through a remodel, SOPREMA’s COLPHENE® LM BARR product was selected to waterproof the building. With a tight deadline and existing concrete preparation to take into consideration, COLPHENE LM BARR was the perfect solution due to its excellent performance qualities. With COLPHENE LM BARR’s STPE moisture cure technology, the new and improved ANB Bank will have a continuous waterproofing layer that can withstand extreme cold and high temperatures without cracking or softening for many years to come.