SOPRALENE® 180 FR GR SKU: 01365
SOPRALENE® 180 FR GR SKU: 01365
SOPRALENE 180 FR GR (fire retardant, granulated) is an SBS-modified bitumen cap ply for use in approved multi-ply membrane and flashing assemblies. SOPRALENE 180 FR GR is composed of a proprietary formulation of elastomeric styrene-butadienestyrene (SBS) polymer modified bitumen and is reinforced with a tough, dimensionally stable non-woven polyester mat. The topside is surfaced with ceramic coated granules and the underside is surfaced with fine mineral aggregate to facilitate cold adhesive application.
Product Properties
- ASTM ASTM D6164
- Component Cap
- Installation Method Cold Adhered, Asphalt Adhered
- Reinforcement Polyester
- Thickness (minimum) 150 mils (3.8 mm)
- Thickness (nominal) 157 mils (4.0 mm)
- Topside Granules
- Underside Sanded
Installation
Prior to installation, unroll SOPRALENE 180 FR GR onto the roof surface and allow to relax. Place SOPRALENE 180 FR GR in desired position and back roll the product. Apply approved cold adhesive following manufacturer specifications. SOPRALENE 180 FR GR is then rolled into the cold adhesive and subsequently broomed in. Refer to the SOPREMA SBS Roofing Installation Guide for additional application guidelines.
Testing & Approvals
Related Products
SENTINEL® KEE P150
SENTINEL KEE P150 is a high-performance, polyester reinforced, thermoplastic roofing membrane that utilizes DOW® ELVALOY™ KEE (Ketone Ethylene Ester) Terpolymer.
View Product
SOPRAFLASH™ R
SOPRAFLASH R is a lightweight, thermally bonded, spunlaid polyester/nylon composite mat. SOPRAFLASH R is a reinforcing non-woven mesh used to…
View Product
DUOTACK® SPF Hose and Gun
The DUOTACK SPF Hose & Gun are used in conjunction with the DUOTACK SPF dual canister adhesive. A hose and…
View ProductRelated Projects
Fishers Island Club – Fishers Island, New York
When it was time to build a new building at the club, SOPREMA products were called into action. On this new building, our COLPHENE® 3000 product was chosen to waterproof the foundation because of its superior strength and adhesion.
Northeast Louisiana State Office Building – Monroe, Louisiana
As an approved manufacturer for the State of Louisiana, the decision makers at the Facility Planning and Control Department were assured that the products installed offered unsurpassed quality. The final assembly was designed to meet FM Approvals 1-90 wind uplift test and proves to protect the building for many years to come.