SOPREMA

Search

SOPRASEAL® Stick 1100T SKU: D14046

SOPRASEAL® Stick 1100T SKU: D14046

SOPRASEAL Stick 1100T is a self-adhered waterproofing membrane. SOPRASEAL Stick 1100T is composed of a proprietary high quality elastomeric styrene- butadiene-styrene (SBS) polymer-modified bitumen blend and a woven polyethylene composite facer. SOPRASEAL Stick 1100T is used as a self-adhered air, vapor and rain barrier on vertical walls of masonry, concrete or gypsum sheathing designed to be used as a base for exterior insulation and finish systems (EIFS). SOPRASEAL Stick 1100T may also be used as a transition membrane at doors, windows, penetrations, etc. The underside consists of a self-adhesive bitumen layer protected by a release paper.

Product Properties

  • Air Permeability ASTM ASTM E2178
  • Air Permeability ASTM ASTM E2357
  • Thickness 40 mils (1.0 mm)
  • Topside Polyethylene Film
  • Vapor Permability ASTM ASTM E96 (Procedure B)

Installation

Substrates must be clean and dry, primed with SOPRASEAL Stick Primer, ELASTOCOL Stick Zero or ELASTOCOL Stick H2O to ensure better adhesion. Apply by peeling back the release film on the underside of the sheet and applywith hand pressure. Once the sheet is in place, roll entire sheet with a weighted roller.

Application temperatures:
Winter grade: 14 to 50°F (-10 to 10°C)
Summer grade: 50 to 122°F (10 to 50°C)

Service temperatures:
Winter grade: -49 to 194°F (-45 to 90°C)
Summer grade: -49 to 194°F (-45 to 90°C)
UV exposure up to 90 days

 

Testing & Approvals

Related Products

SOPRA-XPS 40

SOPRA-XPS 40 is a rigid thermal insulation board made of high-density extruded polystyrene with squared edges on its four sides….

View Product

SENTINEL® SILVER ART PREFABRICATED OUTSIDE CORNERS

SENTINEL® Inside and Outside Corners are manufactured from fiberglass reinforced 60 mil PVC membrane and intended to flash 90 degree…

View Product

3-1 SOPRASMART ROCK

3-1 SOPRASMART ROCK is a high performance panel of an SBS-modified bitumen base membrane, SOPRAROCK mineral wool board, and polyisocyanurate…

View Product

Related Projects

Northeast Louisiana State Office Building – Monroe, Louisiana

As an approved manufacturer for the State of Louisiana, the decision makers at the Facility Planning and Control Department were assured that the products installed offered unsurpassed quality. The final assembly was designed to meet FM Approvals 1-90 wind uplift test and proves to protect the building for many years to come.

Flatiron Building – New York, New York

The Flatiron Building is a triangular 22-story, steel-framed building located at 175 Fifth Avenue in the borough of Manhattan, and is considered to be a ground-breaking skyscraper.