SOPRASLOPE™ SKU: A815
SOPRASLOPE™ SKU: A815
SOPRASLOPE is a cementitious sloping material for use in approved multi-ply membrane and flashing assemblies. SOPRASLOPE is composed of an acrylic modified material used to create auxiliary positive slope, on mineal surfaced membranes concrete, plywood, OSB and other approved substrates.
Product Properties
- Type Membrane Accessories
Installation
SOPRASLOPE is mixed with water at a ratio of 1 bag to 1 1/4 gallons of water in 5 gallon bucket for 3 to 4 minutes. SOPRASLOPE is applied to the approved area via trowel or masonry float. Granules are broadcast into SOPRASLOPE after application until refusal. Ambient air temperature must be between 50°F (10°C) and 110°F (43°C) for six hours after application. Refer to the SOPREMA SBS Roofing Manual for additional application guidelines.
Related Products
ELASTOCOL™ STICK
ELASTOCOL STICK is an SBS polymer based primer approved for use in roofing, walls and waterproofing assemblies. ELASTOCOL STICK is…
View ProductALSAN TRAFIK RS 730 Flash
ALSAN TRAFIK RS 730 FLASH is a high-performance, rapid-setting, polymethyl methacrylate (PMMA) liquid resin for use in flashing applications. ALSAN…
View ProductSOPRABARRIER 20/30/40 PE
SOPRABARRIER is composed of a virgin blended linear-low-density polyethylene (LLDPE). SOPRABARRIER is designed to protect underlying roofing and waterproofing assemblies…
View ProductRelated Projects
JP Morgan Chase – New York, New York
JP Morgan Chase turned to SOPREMA for a permanent solution to several unique waterproofing issues. The answer was a fully reinforced, low odor ALSAN RS 260 LO PMA System with a slip resistant surfacing layer that offers a 20 year guaranteed waterproofing solution.
Pearl Block 136 – Portland, Oregon
For this project, SOPREMA’s SOPRASEAL® product line was selected to provide an airtight barrier. The project was originally specified with another membrane, but due to poor adhesion, our SOPRASEAL Stick VP and SOPRASOLIN® HD products were substituted in.