SOPRAFIX® MBBR BATTEN BAR
SOPRAFIX® MBBR BATTEN BAR
SOPRAFIX® MBBR Batten Bar (Metal Batten Bar Recessed) is a flat, nominal 1 inch wide AZ55 Galvalume metal bar with 3 inch o.c. pre-punched round holes. MBB is available in 10 feet or special order lengths.
Product Properties
- Type Stress Plate
Installation
When installing MBBR, center the MBBR down the middle of the mechanically fastened side lap seam of the SOPRAFIX® field membrane ply. The #15 or #14 fasteners are installed in the MBBR pre-punched holes according to the applicable fastening pattern.
Testing & Approvals
Related Products
SOPRABASE™ TG
SOPRABASE TG is an SBS modified bitumen, polyester-reinforced base sheet for use in multi-ply membrane assemblies. The underside has a…
View Product
SOPRASEAL® LM 204 VP
SOPRASEAL LM 204 VP is a one-component, 98% solids content, liquid applied, vapor-permeable air barrier membrane used in wall construction….
View Product
SOPRAFIX® BASE 614
SOPRAFIX BASE 614 is an SBS-modified bitumen membrane designed specifically for mechanical attachment to approved roof decks. SOPRAFIX BASE 614…
View ProductRelated Projects
John R. Oishei Children’s Hospital – Buffalo, New York
SOPREMA’s SOPRASEAL® Xpress G air and vapor barrier was ideal for this project. The exterior grade, inorganic faced gypsum board with an air and vapor barrier factory applied to the exterior surface, is the first and only ABAA evaluated assembly. SOPRASEAL® Xpress G boards are mechanically fastened to the structure using corrosion resistant SOPRASEAL® Xpress G Screws. A 6 inch self-adhered strip of SOPRASEAL® Stick 1100T is then installed over all board joints.
CSU Maritime Academy – Vallejo, California
California Maritime Academy chose SOPREMA®’s SOPRALENE® SG cap sheet because it meets Title 24 cool roof standards. The California Energy Commission’s Title 24 Energy Efficiency Standards for Residential and Nonresidential Buildings establishes prescriptive requirements for cool roof materials in new construction or major re-roofing projects.