ULTRA-STICK Nail Base is an SBS-modified bitumen nail base sheet for use in approved multi-ply membrane assemblies over nailable deck. ULTRA-STICK Nail Base is composed of a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer modified bitumen and is reinforced with a high quality random glass fiber mat. The topside incorporates a unique surface film for promoting superior adhesion of subsequent plies and the underside is surfaced with fine mineral aggregate.

Product Properties

  • ASTM ASTM D4601
  • Component Base
  • Installation Method Mechanically Attached
  • Reinforcement Glass Fiber


Prior to installation, unroll ULTRA-STICK Nail Base onto the roof surface and allow to relax. Place ULTRA-STICK Nail Base in desired position. ULTRA-STICK Nail Base is then mechanically fastened to the approved substrate following the fastening pattern required for proper uplift. Subsequent approved base plies are applied to ULTRA-STICK Nail Base via self-adhered application. Refer to the SOPREMA SBS Roofing Manual for additional application guidelines.


Testing & Approvals

Related Products


SOPRADRAIN 100 is composed of a lightweight impermeable polymeric sheet forming a high flow dimpled drainage layer that is fused…

View Product

ALSAN® RS Vinyl Chips

ALSAN RS Vinyl Chips are solid, chemically inert, pigmented acrylic chips used to create decorative aesthetic finishes with ALSAN RS…

View Product


ALSAN® RS Liquid Thixo is a proprietary thixotropic agent used as an additive with ALSAN RS PMMA & PMA resins…

View Product

Related Projects

Museum of the American Revolution – Philadelphia, Pennsylvania

Multiple SOPREMA products ranging from ELASTOPHENE® Flam to the SOPRANATURE® vegetated roofing system were used to complete this project. The Museum of the American Revolution is unique in the fact that it has an exposed SBS roof membrane, extensive vegetated roofs, terrace roofs with pavers and even has some vegetated wall systems. The building resembles 1800’s architecture with a modern flare.

John R. Oishei Children’s Hospital – Buffalo, New York

SOPREMA’s SOPRASEAL® Xpress G air and vapor barrier was ideal for this project. The exterior grade, inorganic faced gypsum board with an air and vapor barrier factory applied to the exterior surface, is the first and only ABAA evaluated assembly. SOPRASEAL® Xpress G boards are mechanically fastened to the structure using corrosion resistant SOPRASEAL® Xpress G Screws. A 6 inch self-adhered strip of SOPRASEAL® Stick 1100T is then installed over all board joints.