ALSAN® RS 260 LO FIELD SKU: L-RS050S
ALSAN® RS 260 LO FIELD SKU: L-RS050S
ALSAN RS 260 LO FIELD is a high-performance, low odor, rapid-setting, polymethacrylate (PMA) liquid resin. ALSAN RS 260 LO FIELD resin is combined with fleece fabric to form a monolithic, self-flashing and self-adhering reinforced waterproofing membrane. ALSAN RS 260 LO FIELD is available in a summer or winter formulations.
Product Properties
- Installation Method 2 Part
- Material Liquid
- Technology PMA
Installation
Using a slow-speed (200 to 400 rpm) mechanical agitator, thoroughly mix the entire container of resin for two minutes before use. Only catalyze the amount of material that can be used within 10-15 minutes. Add the pre-measured catalyst to the resin component and stir for two minutes and apply to the substrate. Refer to the catalyst information found on the second page of the PDS. Apply without dilution or thinning.
After mixing, apply ALSAN RS 260 LO FIELD to prepared substrate at the required consumption using a roller or brush. The resin should be applied evenly onto the surface using care not to spread too thin or pool in low areas.
Refer to the ALSAN RS Roofing Technical Manual for additional application guidelines.
Testing & Approvals
Related Products
ALSAN TRAFIK EP 140
ALSAN Trafik EP 140 is a two-component, high solids, low odor, liquid applied epoxy primer. This primer provides excellent adhesion…
View ProductSOPRANATURE® DRAIN PLATE 25
SOPRANATURE DRAIN PLATE 25 is a 1 in tall, three-dimensional plastic drainage structure for green roofing systems. Unlike thin, flexible…
View ProductSENTINEL® KEE VCM
SENTINEL KEE VCM is a 24 gauge (0.6 mm) galvanized steel sheet with a 20 mil SENTINEL KEE membrane laminated…
View ProductRelated Projects
Berry Architecture Office Building – Red Deer, Alberta
“The building’s crowning glory is the green roof which features a stream, native plantings, vegetable gardens, and bird, butterfly and bee habitats”, as stated by Berry Architecture + Associates. SOPREMA®’s SOPRANATURE® vegetated system was chosen for this project attaining LEED Gold certification.
U.S. Treasury Building – Washington DC
The Treasury Building is the oldest departmental building in Washington and has had a great impact on the design of other governmental buildings. At the time of its completion, it was one of the largest office buildings in the world.