ELASTOPHENE® HS SANDED SKU: 00564
ELASTOPHENE® HS SANDED SKU: 00564
ELASTOPHENE HS Sanded (high strength) is an SBS-modified bitumen base ply for use in approved multi-ply membrane and flashing assemblies. ELASTOPHENE HS Sanded is composed of a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer modified bitumen and is reinforced with a tough, dimensionally stable composite polyester/glass fiber reinforcement. The topside and underside are surfaced with fine mineral aggregate to facilitate cold adhesive application.
Product Properties
- ASTM ASTM D6162
- Components Base Ply
- Installation Method Cold Adhered, Asphalt Adhered
- Reinforcement Composite
- Thickness (minimum) 110 mils (2.8 mm)
- Thickness (nominal) 118 mils (3.0 mm)
- Topside Sanded
- Underside Sanded
Installation
Prior to installation, unroll ELASTOPHENE HS Sanded onto the roof surface and allow to relax. Place ELASTOPHENE HS Sanded in desired position and back roll the product. Apply approved cold adhesive following manufacturer specifications. ELASTOPHENE HS Sanded is then rolled into the cold adhesive and subsequently rolled with a weighted roller. Subsequent approved inter-ply or cap ply membranes are applied to ELASTOPHENE HS Sanded via cold adhesive. Refer to the SOPREMA SBS Roofing Guide for additional application guidelines.
Testing & Approvals
Related Products
ELASTOPHENE® PS 3.0
ELASTOPHENE® PS 3.0 is an SBS-modified bitumen base ply for use in approved multi-ply membrane and flashing assemblies. ELASTOPHENE PS…
View ProductPOLYFLEECE
POLYFLEECE is a proprietary non-woven polyester reinforcement used in the following waterproofing and flashings: ALSAN Flashing, ALSAN Coating AC 401,…
View ProductALSAN® COATING SIL 402 WALKWAY GRADE
ALSAN COATING SIL 402 WALKWAY GRADE is a VOC compliant, high solids, single component, moisture curing, silicone coating used to…
View ProductRelated Projects
Strongsville Starbucks®- Strongsville, Ohio
Roof Rite, the roofing contractor on the job, brought SOPREMA products into the mix based on the wide product selection and proven past performance.
PGA of America Headquarters – Frisco, Texas
The PGA of America’s new facility is far more than just a headquarters building – PGA members, associates and staff refer to it as “home.” There’s plenty of substance behind that choice of labeling too. After all, what golfer wouldn’t feel at home in a facility that boasts an education center with advanced coaching facilities, an indoor short game practice area, 11 standard and four simulated hitting bays, and a practice green wired with motion-capture sensors? The creatively-designed space is illuminated largely by sunlight, and even includes a large video screen near the main entrance that uses RFID technology to welcome members by name.