ALSAN® FLASHING SKU: D32800


ALSAN® FLASHING SKU: D32800
ALSAN Flashing is a proprietary polyurethane bituminous resin specifically formulated for high performance liquid-applied flashings, other details and maintenance applications.
Product Properties
- Installation Method 1 Part
- Material Liquid
- Technology Polyurethane Bitumen
Installation
For flashing applications, apply at a rate of 2.0 gallons per 100 ft2 onto prepared substrate. Immediately center and embed ALSAN Polyfeece reinforcement at the transition change into wet ALSAN Flashing. Apply an embedment application of ALSAN Flashing at a rate of 2.0 gallons per 100 ft2, ensuring that the Polyfleece is
completely embedded, covered and watertight. Allow to dry. Apply a final finish application of ALSAN Flashing at a rate of 2.0 gallons per 100 ft2. ALSAN Flashing can be left exposed or ceramic granules can be broadcast into this final ALSAN Flashing coat prior to skinning over of the product. ALSAN Flashing is applied with rollers, brushes and squeegees. The applicator is responsible for ensuring conditions are appropriate to proceed with proper application methods.
Testing & Approvals



Related Products
SOPRASEAL STICK FLASHPRO
SOPRASEAL STICK FLASHPRO a 17mil, self-adhesive, air and vapor barrier flashing membrane composed of a polymer-based adhesive and a tough,…
View Product
ALSAN® RS COLOR ADDITIVE
ALSAN RS Color Additive is mixed with ALSAN RS 287 Color Finish Base and ALSAN RS 289 Textured Base unpigmented…
View Product
Bitutak Cold Mineral
BITUTAK® Cold Mineral is a 4.0 mm (157 mils) APP (Atactic Polypropylene) modified bitumen roofing membrane for approved multi-ply membrane…
View ProductRelated Projects
Michigan State University – East Lansing, Michigan
The facilities management staff at Michigan State University is responsible for over 17,000,000 sq.ft. of roofs. When the staff determines that a re-roof of one of the 580 buildings on campus is necessary, options are limited to known and trusted manufacturers that offer systems with superior in-field performance, such as SOPREMA.
Northeast Louisiana State Office Building – Monroe, Louisiana
As an approved manufacturer for the State of Louisiana, the decision makers at the Facility Planning and Control Department were assured that the products installed offered unsurpassed quality. The final assembly was designed to meet FM Approvals 1-90 wind uplift test and proves to protect the building for many years to come.