ELASTOPHENE® STICK SKU: 00571
ELASTOPHENE® STICK SKU: 00571
ELASTOPHENE Stick is an SBS-modified bitumen, self-adhered base ply for use in approved multi-ply membrane and flashing assemblies. ELASTOPHENE Stick is composed of a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer modified bitumen in combination with a high tack self-adhesive layer and is reinforced with a high quality random glass fiber mat. The topside is surfaced with fine mineral aggregate to facilitate self-adhered or cold adhesive applications and the underside is surfaced with protective polyolefin release film that is removed during application.
Product Properties
- ASTM ASTM D6163
- Component Base
- Installation Method Self Adhered
- Reinforcement Glass Fiber
- Thickness (minimum) 79 mils (2.0 mm)
- Thickness (nominal) 87 mils (2.2 mm)
- Topside Sanded
- Underside Release Film
Installation
Prior to installation, unroll ELASTOPHENE Stick onto the roof surface and allow to relax. Place ELASTOPHENE Stick in desired position. Remove the protective release film from the underside of the sheet and roll ELASTOPHENE Stick into place with a weighted roller. Subsequent approved inter-ply or cap ply membranes are applied to ELASTOPHENE Stick
via self-adhered or cold adhesive applications. Refer to the SOPREMA SBS Roofing Guide for additional application guidelines.
Testing & Approvals
Related Products
SOPRANATURE® TOUNDRA BOX
SOPRANATURE TOUNDRA BOX combines all the necessary components of a green roofing system into a modular tray. Each tray includes…
View Product
SOPRALENE® 250 SP 4.0
SOPRALENE 250 SP 4.0 is an SBS-modified bitumen base ply for use in approved multi-ply membrane and flashing assemblies. SOPRALENE…
View Product
ALSAN® COATING SIL 402 FLASHING
ALSAN COATING SIL 402 FLASHING is a VOC compliant, high solids, single component, low sag, silicone mastic used to prepare…
View ProductRelated Projects
Parkland Hospital – Dallas, Texas
The new hospital featured flat rooftops at multiple levels that all needed to be made watertight for decades to come. The roofing system needed to be designed in a way that accounted for a helipad, consistent rooftop traffic, extensive rooftop equipment, lightwells and various utility platforms. A lot stood in the way of Anchor Roofing, the installer, but the meticulous planning for the project meant that all contingencies had been considered by the time application of the waterproofing system began.
World Vision – Federal Way, Washington
When looking for a quality roof system that would have minimal impact on everyday operations and overall budget, Wayne’s Roofing, Inc. selected SOPREMA’s SOPRASMART® product line. Not only was SOPRASMART® an affordable product, it also offered time and labor savings.