SOPREMA

Search

ALSAN TRAFIK PU 420 SKU: 00513173, 00513173

ALSAN TRAFIK PU 420 SKU: 00513173, 00513173

ALSAN TRAFIK PU 420 is a two-component, liquid applied aromatic polyurethane elastomeric topcoat. This topcoat provides excellent adhesion to SOPREMA polyurethane system base coats for application of SOPREMA polyurethane coating systems. ALSAN TRAFIK PU 420 is recommended for light and heavy-duty pedestrian and vehicular applications that are not exposed to ultra-violet light. When a topcoat is needed for UV exposure applications ALSAN TRAFIK PU 421 should be used.

Product Properties

  • Material Polyurethane
  • Technology Polyurethane

Installation

Thoroughly mix ALSAN TRAFIK PU 420 Part A prior to combining. The volume mixing ratio is 5 gallons of Part A to 1/2 pint of Part B. Combined components should be mixed using a jiffy blade mixer at slow speed for at least 2 – 3 minutes. ALSAN TRAFIK PU 420 is applied to the approved area via roller, trowel or notched squeegee. The resin should be applied evenly onto the surface at a wet film thickness of 15 -20 mils (0.4 – 0.5 mm).

 

Related Products

COLPHENE® H-EV

COLPHENE® H-EV (environmentally friendly) is a hot-applied, rubberized asphalt waterproofing membrane for use in approved waterproofing assemblies.

View Product

SOPRASEAL STICK FLASHPRO AB

SOPRASEAL STICK FLASHPRO AB is a 35 mil thick air and vapor barrier flashing membrane, made with a UV exposable…

View Product

ELASTOCOL™ 500

ELASTOCOL 500 is an asphalt based primer for use in approved multi-ply membrane and flashing assemblies. ELASTOCOL 500 is composed…

View Product

Related Projects

San Francisco War Memorial – San Francisco, California

SOPREMA’s advanced PMMA membrane system, ALSAN® RS 230 was chosen for waterproofing this international landmark because of the ease of installation in tight areas and short time schedule.

Holiday Inn Express – Medina, Ohio

SOPREMA®’s SOPRASEAL® Stick VP self-adhered vapor-permeable air barrier membrane was installed to ensure a continuous air barrier with no moisture infiltration for this wall assembly requiring a “breathable” characteristic. It creates a solid barrier against air infiltration and exfiltration, which minimizes associated energy loss and condensation problems.