ALSAN TRAFIK RS 730 Flash
ALSAN TRAFIK RS 730 Flash
ALSAN TRAFIK RS 730 FLASH is a high-performance, rapid-setting, polymethyl methacrylate (PMMA) liquid resin for use in flashing applications. ALSAN TRAFIK RS 730 FLASH resin is combined with ALSAN RS FLEECE to form a monolithic, self-flashing and self-adhering reinforced waterproofing membrane. ALSAN TRAFIK RS 730 FLASH is available in summer or winter formulations.
Product Properties
- Material PMMA
- Technology PMMA
Installation
Using a slow-speed (200 to 400 rpm) mechanical agitator, thoroughly mix the entire container of resin for two minutes before use. Only catalyze the amount of material that can be used within 10 – 15 minutes. Add the pre-measured catalyst to the resin component and stir for two minutes and apply to the substrate. Refer to the catalyst information found on the second page of the PDS. Apply without dilution or thinning.
After mixing, apply ALSAN TRAFIK RS 730 FLASH to prepared substrate at the required consumption using a roller or brush. The resin should be applied evenly onto the surface using care not to spread too thin or pool in low areas.
Refer to the ALSAN TRAFIK RS Roofing Technical Manual for additional application guidelines.
Related Products
SENTINEL® WALKWAY PAD
SENTINEL WALKWAY PAD is an extruded roll made from polyvinyl chloride (PVC) membranes. It protects the roof membranes from damage…
View ProductCOLPHENE® LM BARR
COLPHENE® LM BARR is a single component with 98% solids content and a liquid-applied, moisture-curing elastomeric waterproofing membrane.
View ProductSOPRAFIX® MBB BATTEN BAR
SOPRAFIX® MBB (Metal Batten Bar) is a flat, nominal 1 inch wide AZ55 Galvalume metal bar with 3″ o.c. pre-punched…
View ProductRelated Projects
Hard Rock Hotel – Universal Studios, Florida
The Hard Rock Hotel at Universal Studios, Florida features a SOPREMA roof system including SOPRALENE base and cap plies.
ANB Bank – Denver, Colorado
When the Denver ANB Bank was to go through a remodel, SOPREMA’s COLPHENE® LM BARR product was selected to waterproof the building. With a tight deadline and existing concrete preparation to take into consideration, COLPHENE LM BARR was the perfect solution due to its excellent performance qualities. With COLPHENE LM BARR’s STPE moisture cure technology, the new and improved ANB Bank will have a continuous waterproofing layer that can withstand extreme cold and high temperatures without cracking or softening for many years to come.