SOPREMA

Search

COLPHENE® FLAM 180 FR GR SKU: 01226

COLPHENE® FLAM 180 FR GR SKU: 01226

COLPHENE® Flam 180 FR GR (fire retardant, granulated) is an SBS-modified bitumen cap ply for use in approved multi-ply waterproofing assemblies. COLPHENE Flam 180 FR GR is composed of a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer modified bitumen and is reinforced with tough, dimensionally stable non-woven polyester mat. The topside is surfaced with ceramic coated granules and underside is surfaced with polyolefin burn-off film to optimize heat welding.

Product Properties

  • Installation Method Heat Welded
  • Reinforcement Polyester
  • Thickness 160 mils (4.0 mm)
  • Topside Granules
  • Underside Burn Off Film

Installation

Prior to installation, unroll COLPHENE Flam 180 FR GR onto the surface and allow to relax. Position COLPHENE Flam 180 FR GR in desired position and back roll the product. COLPHENE Flam 180 FR GR is then heat welded to approved substrates. Refer to SOPREMA® specifications and installation instructions for additional application guidelines.

 

Testing & Approvals

Our Other Brands

Related Products

COLPHENE® BSW V

COLPHENE® BSW V is an SBS-modified bitumen, self-adhered waterproofing membrane for use in approved blind side waterproofing assemblies. COLPHENE BSW…

View Product

INSONO AF3 Primer

INSONO AF3 Primer is a water-based polymer emulsion primer. INSONO AF3 Primer is designed to improve the adhesion of INSONO…

View Product

ALSAN® RS LO Primer Activator

ALSAN RS LO Primer is a 100% solids, low-odor epoxy used to promote adhesion to Metals (excluding copper), concrete, masonry,…

View Product

Related Projects

Hazel Harvey Peace Elementary – Fort Worth, Texas

Hazel Harvey Peace Elementary School is a point of pride for the 2010 Fort Worth Independent School District. The school district’s focus on sustainability and energy efficiency is enhanced with the use of the Soprastar® ENERGY STAR® rated reflective cap sheets.

Airport High School – West Columbia, South Carolina

Because of the uneven surface of the remaining embedded aggregate, SOPRAROCK® was chosen knowing that this board would conform to the uneven surface much better than a rigid coverboard could. This idea spawned another....”why not use SOPRASMART® XP”; and allow one application step instead of two. The project was capped off with SOPRALENE® 180 FR GR, in COLPLY® Adhesive.