COLVENT™ FLAM TG SKU: 00372
COLVENT™ FLAM TG SKU: 00372
COLVENT Flam TG (torch grade) is an SBS-modified bitumen vented base ply for use in approved multi-ply membrane and flashing assemblies. COLVENT Flam TG is reinforced with a tough glass fiber mat that is saturated and coated on both sides with a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer modified bitumen.
Product Properties
- ASTM ASTM D6163
- Component Base
- Installation Method Heat Welded
- Reinforcement Glass Fiber
- Thickness (minimum) 79 mils (2.0 mm)
- Thickness (nominal) 87 mils (2.2 mm)
- Topside Burn Off Film
- Underside Burn Off Film
Installation
Prior to installation, unroll COLVENT Flam TG onto the roof surface and allow to relax. Place the membrane into the desired position and back roll the product. COLVENT Flam TG is then heat welded to approved substrates. Subsequent approved inter-ply or cap ply membranes are applied to COLVENT Flam TG via heat welding.
Testing & Approvals
Related Products
ALSAN® COATING BUTYL FLEECE TAPE
ALSAN COATING BUTYL FLEECE TAPE contains a butyl rubber compound with a polyester fleece face used where required or recommended…
View Product
SOPRALASTIC® 124 ALU
SOPRALASTIC 124 ALU is a high performance proprietary elastomeric bitumen waterproofing coating with aluminum leafing pigmentation used for revitalizing and…
View Product
SOPREMA® Counter Flashing
SOPREMA® Counter Flashing is designed to provide a watertight termination at the leading edge of the roofing material. SOPREMA Counter…
View ProductRelated Projects
Memorial Hermann Hospital – Houston, Texas
Woodridge Middle School – Peninsula, Ohio
With a tight schedule to meet, Woodridge Middle School was relying on SOPREMA’s SENTINEL products to do the job. The previous shingle and PVC roof was replaced with SOPRA-ISO, and tan SENTINEL P150 HFB. The gutters were then lined with ALSAN RS 222 primer and ALSAN RS 230 Flash.