ALSAN® COATING BUTYL FLEECE TAPE SKU: L-SILFT4

ALSAN® COATING BUTYL FLEECE TAPE SKU: L-SILFT4
ALSAN Coating Butyl Fleece Tape contains a butyl rubber compound with a polyester fleece face used where required or recommended as reinforcement to enhance tensile strength, tear resistance, elongation, and performance of ALSAN Coating SIL 402 and ALSAN Coating AC 401 applications. ALSAN Coating Butyl Fleece Tape is typically used to treat laps, joints, seams flashings and repairs on metal, single ply and smooth asphalt based roof systems.
Product Properties
- Material Accessories
Installation
Apply ALSAN Coating Butyl Fleece Tape only in temperatures between 40°F and 95°F (4.4°C and 35°C). After the surface has been properly prepared, cut tape to desired length. Remove the release liner and position over desired area. Precisely apply the tape directly to the area on the first attempt, as trying to remove may damage the
tape and/or the roofing surface. Firmly press on all areas of tape with a finger or roller, making sure tape stays conformed to the roof surface. Always roll from the center towards the outside to remove any air pockets. Edges must be free of any fishmouths.
Do not stretch tape during application. Apply ALSAN Coating SIL 402 or ALSAN Coating AC 401 over tape the same day. For more information on coverage rates for ALSAN Coating SIL 402 or ALSAN Coating AC 401 reference the product data sheet.
Related Products
ALSAN® COATING SIL 402
ALSAN Coating SIL 402 is a VOC compliant, high solids, single component, silicone roof coating and protective barrier for…
View Product
ALSAN® COATING AC 401
ALSAN Coating AC 401 is a VOC compliant, high quality, single component, plasticizer-free, water-based, acrylic elastomeric roof coating and…
View Product
ALSAN® COATING UNIVERSAL PRIMER
ALSAN Coating Universal Primer is a highly engineered, single component, water-based primer designed for application over aged single plies (TPO,…
View ProductRelated Projects
Museum of the American Revolution – Philadelphia, Pennsylvania
Multiple SOPREMA products ranging from ELASTOPHENE® Flam to the SOPRANATURE® vegetated roofing system were used to complete this project. The Museum of the American Revolution is unique in the fact that it has an exposed SBS roof membrane, extensive vegetated roofs, terrace roofs with pavers and even has some vegetated wall systems. The building resembles 1800’s architecture with a modern flare.
Fishers Island Club – Fishers Island, New York
When it was time to build a new building at the club, SOPREMA products were called into action. On this new building, our COLPHENE® 3000 product was chosen to waterproof the foundation because of its superior strength and adhesion.