SOPREMA

Search

ELASTOCOL™ STICK ZERO SKU: D37700

ELASTOCOL™ STICK ZERO SKU: D37700

ELASTOCOL™ Stick Zero is a zero VOC polymer based primer for use in approved multi-ply membrane and flashing assemblies. ELASTOCOL Stick Zero is composed of a proprietary blend of polymers, solvents and additives used to increase adhesion when using self-adhered SBS membranes. ELASTOCOL Stick Zero may be applied to gypsum, masonry, metal, wood and SOPREMA® mineral aggregate surfaced membranes.

Product Properties

  • Base Solvent-Based
  • Overlying Application Self-Adhered
  • Type Primer
  • VOC Low VOC

Installation

Mix prior to application. ELASTOCOL Stick Zero is applied to the approved area via brush, roller or spray equipment. ELASTOCOL Stick Zero is applied at a rate of 0.7 to 1 gallon per 100 square feet over non porous substrates. Refer to the SOPREMA SBS Roofing Manual for additional application guidelines.

 

Testing & Approvals

Related Products

ALSAN® RS FLEECE

ALSAN RS Fleece is a proprietary non-woven polyester reinforcement used in ALSAN RS liquid membrane applications. ALSAN RS Fleece is…

View Product

ULTRA-STICK® NAIL BASE

ULTRA-STICK Nail Base is an SBS-modified bitumen nail base sheet for use in approved multi-ply membrane assemblies over nailable deck….

View Product

DUOTACK® SPF ADHESIVE

DUOTACK SPF Adhesive is a low pressure, two-component spray polyurethane foam adhesive specially formulated by SOPREMA for adhering SENTINEL HFB…

View Product

Related Projects

Museum of the American Revolution – Philadelphia, Pennsylvania

Multiple SOPREMA products ranging from ELASTOPHENE® Flam to the SOPRANATURE® vegetated roofing system were used to complete this project. The Museum of the American Revolution is unique in the fact that it has an exposed SBS roof membrane, extensive vegetated roofs, terrace roofs with pavers and even has some vegetated wall systems. The building resembles 1800’s architecture with a modern flare.

Holiday Inn Express – Medina, Ohio

SOPREMA®’s SOPRASEAL® Stick VP self-adhered vapor-permeable air barrier membrane was installed to ensure a continuous air barrier with no moisture infiltration for this wall assembly requiring a “breathable” characteristic. It creates a solid barrier against air infiltration and exfiltration, which minimizes associated energy loss and condensation problems.