ELASTOPHENE® HR SANDED 2.2 SKU: 00209
ELASTOPHENE® HR SANDED 2.2 SKU: 00209
ELASTOPHENE HR Sanded 2.2 (high resistance) is an SBS-modified bitumen base ply for use in approved multi-ply membrane and flashing assemblies. ELASTOPHENE HR Sanded 2.2 is composed of a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer modified bitumen and is reinforced with high performance glass scrim. The topside and underside are surfaced with fine mineral aggregate to facilitate cold adhesive application.
Product Properties
- ASTM ASTM D6163
- Component Base
- Installation Method Cold Adhered, Asphalt Adhered
- Reinforcement Glass Scrim
- Thickness (minimum) 79 mils (2.0 mm)
- Thickness (nominal) 87 mils (2.2 mm)
- Topside Sanded
- Underside Sanded
Installation
Prior to installation, unroll ELASTOPHENE HR Sanded 2.2 onto the roof surface and allow to relax. Place ELASTOPHENE HR Sanded 2.2 in desired position and back roll the product. Apply approved cold adhesive following manufacturer specifications. ELASTOPHENE HR Sanded 2.2 is then rolled into the cold adhesive subsequently rolled with a weighted roller. Subsequent approved inter-ply or cap ply membranes are applied to ELASTOPHENE HR Sanded 2.2 via cold adhesive. Refer to the SOPREMA SBS Roofing Guide for additional application guidelines.
Testing & Approvals
Related Products
SOPRA-TITE Modified 300 Fascia
SOPRA-TITE Modified 300 Fascia is manufactured in 12 foot lengths with pre-punched fastening holes in the galvanized water dam to…
View Product
ALSAN® COATING ASPHALT BLEED BLOCKING PRIMER
ALSAN COATING ASPHALT BLEED BLOCKING PRIMER is a water-based, acrylic primer that is VOC compliant, single component and used to…
View Product
SOPRAFLOR AU
SOPRANATURE SOPRAFLOR AU is optimized for fertility, workability and longevity. The medium of choice for rooftop farms for the production…
View ProductRelated Projects
Garibaldi Square Condos – Chicago, Illinois
This award winning project is the direct result of the building owner’s resistance to using hot asphalt and torches on the roof. SOPREMA’s mechanically attached, self-adhered system was used to accommodate the building owner’s desires.
Museum of the American Revolution – Philadelphia, Pennsylvania
Multiple SOPREMA products ranging from ELASTOPHENE® Flam to the SOPRANATURE® vegetated roofing system were used to complete this project. The Museum of the American Revolution is unique in the fact that it has an exposed SBS roof membrane, extensive vegetated roofs, terrace roofs with pavers and even has some vegetated wall systems. The building resembles 1800’s architecture with a modern flare.