SOPREMA

Search

SOPRALENE® 180 FR+ GR SKU: 01312

SOPRALENE® 180 FR+ GR SKU: 01312

SOPRALENE 180 FR+ GR (fire retardant, granulated) is an SBS-modified bitumen cap ply for use in approved multi-ply membrane and flashing assemblies. SOPRALENE 180 FR+ GR is composed of a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer modified bitumen and is reinforced with a tough, dimensionally stable non-woven polyester mat. The topside is surfaced with ceramic coated granules and the underside is surfaced with fine mineral aggregate to facilitate cold adhesive application.

Product Properties

  • ASTM ASTM D6164
  • Component Cap
  • Installation Method Cold Adhered, Asphalt Adhered
  • Reinforcement Polyester
  • Thickness 160 mils (4.0 mm)
  • Topside Granules
  • Underside Sanded

Installation

Prior to installation, unroll SOPRALENE 180 FR+ GR onto the roof surface and allow to relax. Place SOPRALENE 180 FR+ GR in desired position and back roll the product. Apply approved cold adhesive following manufacturer specifications. SOPRALENE 180 FR+ GR is then rolled into the cold adhesive and subsequently rolled with a weighted roll if utilizing cold adhesives. Refer to the SOPREMA SBS Roofing Guide for additional application guidelines.

 

Testing & Approvals

Our Other Brands

Related Products

COLPHENE® 180 SP

COLPHENE® 180 SP is an SBS-modified bitumen base ply reinforced with fine mineral aggregate. The underside is surfaced with polyolefin burn-off film to optimize heat welding.

View Product

ELASTOPHENE® FLAM HR 2.2

ELASTOPHENE® Flam HR 2.2 (high resistance) is an SBS-modified bitumen base ply for use in approved multi-ply membrane and flashing…

View Product

SOPRALENE® 180 SP 3.5

SOPRALENE 180 SP 3.5 (sanded, polyolefin) is an SBS-modified bitumen base ply for use in approved multi-ply membrane and flashing…

View Product

Related Projects

Parkland Hospital – Dallas, Texas

The new hospital featured flat rooftops at multiple levels that all needed to be made watertight for decades to come. The roofing system needed to be designed in a way that accounted for a helipad, consistent rooftop traffic, extensive rooftop equipment, lightwells and various utility platforms. A lot stood in the way of Anchor Roofing, the installer, but the meticulous planning for the project meant that all contingencies had been considered by the time application of the waterproofing system began.

Strongsville Starbucks®- Strongsville, Ohio

Roof Rite, the roofing contractor on the job, brought SOPREMA products into the mix based on the wide product selection and proven past performance.