ELASTOPHENE® ULTRA-STICK FR GR SKU: 01429

ELASTOPHENE® ULTRA-STICK FR GR SKU: 01429
ELASTOPHENE ULTRA-STICK FR GR (fire retardant, granulated) is an SBS-modified bitumen cap ply for use in approved multi-ply membrane and flashing assemblies. ELASTOPHENE ULTRA-STICK FR GR is composed of a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer modified bitumen in combination with a specially formulated high tack self-adhesive bottom layer and is reinforced with a high quality, random glass fiber mat. The topside is surfaced with ceramic coated granules and the underside is surfaced with a protective split back release film that is removed during application.
Product Properties
- ASTM ASTM D6163
- Component Cap
- Installation Method Self Adhered
- Reinforcement Glass Fiber
- Thickness 142 mils (3.6 mm)
Installation
Prior to installation, unroll ELASTOPHENE ULTRA-STICK FR GR onto the roof surface and allow to relax. Place ELASTOPHENE ULTRA-STICK FR GR in desired position. Remove one side of the split back release film and use hand pressure to adhere exposed high tack bottom layer. Remove the other half of the release film and roll the entire surface of the sheet with a weighted roller. Refer to the SOPREMA SBS Roofing Manual for additional application guidelines.
Related Products
LASTOBOND® ECO
LASTOBOND® ECO is an SBS-modified bitumen underlayment for use in approved composition shingle steep slope assemblies. LASTOBOND ECO is composed…
View Product
SENTINEL® SILVER ART VINYL COATED METAL
SENTINEL® VCM is a 24 gauge (0.6 mm) galvanized metal sheet with a 20 mil SENTINEL PVC membrane laminated to…
View Product
SOPRANATURE™ FILTER FABRIC
SOPRANATURE™ Filter Fabric is a non-recycled polypropylene, staple fiber, needle-punched nonwoven geotextile designed to separate the growth medium from the…
View ProductRelated Projects
Assurant Building – Miami, Florida
In 2015, Assurant, a risk management solutions company, was in need of a full re-roof on their 92,180 square foot building. When searching for a roofing solution that met all codes and requirements, it was decided that a modified bitumen three ply roof system with a SOPRASTAR® cap ply would replace the existing roof. The SOPRASTAR® cap ply membrane easily met both the Miami- Dade code and Factory Mutual (FM) guidelines, making it one less concern.
Airport High School – West Columbia, South Carolina
Because of the uneven surface of the remaining embedded aggregate, SOPRAROCK® was chosen knowing that this board would conform to the uneven surface much better than a rigid coverboard could. This idea spawned another....”why not use SOPRASMART® XP”; and allow one application step instead of two. The project was capped off with SOPRALENE® 180 FR GR, in COLPLY® Adhesive.