ELASTOPHENE® ULTRA-STICK SKU: 01435

ELASTOPHENE® ULTRA-STICK SKU: 01435
ELASTOPHENE ULTRA-STICK is an SBS-modified bitumen, self-adhered base sheet for use in approved multi-ply membrane and flashing assemblies. ELASTOPHENE ULTRA-STICK is composed of a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer modified bitumen in combination with a specially formulated high tack self adhesive bottom layer and is reinforced with a high quality random glass fiber mat. The topside incorporates a unique surface film for promoting superior adhesion of subsequent plies and the underside is surfaced with a protective split back release film that is removed during application.
Product Properties
- ASTM ASTM D6163
- Component Base
- Installation Method Self Adhered
- Reinforcement Glass Fiber
Installation
Prior to installation, unroll ELASTOPHENE ULTRA-STICK onto the roof surface and allow to relax. Place ELASTOPHENE ULTRA-STICK in desired position. Remove one side of the ELASTOPHENE ULTRA-STICK split back release film and use hand pressure to adhere exposed high tack bottom layer. Remove the other half of the ELASTOPHENE ULTRA-STICK’s release film and roll the entire surface of the sheet with a weighted roller. Subsequent approved cap ply membranes are applied to ELASTOPHENE ULTRA-STICK via self-adhered or heat welded application. Refer to the SOPREMA SBS Roofing Manual for additional application guidelines.
Testing & Approvals

Related Products
LASTOBOND® SHIELD HT
LASTOBOND SHIELD HT (high temperature) is a SBS-modified bitumen underlayment for use in approved steep-slope assemblies. LASTOBOND SHIELD HT is…
View Product
ACOUSTIZOL
ACOUSTIZOL is an acoustic membrane composed of polyester fibers laminated to a continuous high density polyethylene/aluminum foil complex. ACOUSTIZOL is…
View Product
COLPHENE® 3000
COLPHENE® 3000 is a self-adhered, SBS-modified bitumen membrane. The topside is surfaced with a tri-laminated woven polyethylene facer and the underside is surfaced with a silicone release film.
View ProductRelated Projects
The Westin Savannah Harbor – Savannah, Georgia
The Westin was due for a roof replacement on 17,828 square feet of its property. To complete the project, SOPREMA’s SOPRAISO ™, DUOTACK®, SENTINEL® P-150, and ALSAN® RS 230 Flash were selected. These products allowed for the design to meet FM 1-120 codes and the use of ALSAN RS 230 Flash solved any difficult flashing details which was only one of many reasons
SOPREMA products were selected.
Riviere Saint-Etienne Bridge – Saint Denis, France
City: Saint Denis
Country: Reunion Island (Bourbon Island) - France
Product used: ANTIROCK® P quickly implemented on asphalt with the use of 2 new generation of Mini-Macaden® - Upstands : Flashing® TP