ALSAN® PRE-CUT FLEECE SKU: L-RS023B

ALSAN® PRE-CUT FLEECE SKU: L-RS023B
ALSAN Fleece is a proprietary non-woven polyester reinforcement used in ALSAN RS liquid membrane or ALASN Flashing applications.
*ALSAN Pre-Cut Fleece should not be used with COLPHENE LM BARR Products. COLPHENE Barr utilizes SOPREMA Polyfleece. For more information visit each products respective product data sheet.
Product Properties
- Material Reinforcement
Installation
Mix and apply ALSAN RS or ALSAN Flashing products in strict accordance with published instructions. Apply catalyzed ALSAN RS or mixed ALSAN Flashing to the prepared surface and place ALSAN Pre-CutFleece into the wet product, making sure the fleece is smooth and without any wrinkles. ALSAN Pre-Cut Fleece will begin to saturate into the liquid resin. Using a roller, wet the fleece with resin, applying light pressure. Roll the fleece with a nap roller to eliminate any air bubbles, wrinkles, etc. Apply additional layer of ALSAN RS or ALSAN Flashing until fully saturated and the layer of resin is fully and uniformly applied.
Related Products
ALSAN® RS 276 PRIMER
ALSAN RS 276 Primer is a rapid-setting, proprietary formulation polymethyl methacrylate (PMMA) primer. ALSAN RS 276 Primer is utilized to…
View Product
SOPRAWAY NG2
SOPRAWAY NG2 is an anti-fracture acoustic membrane intended for ceramic tiles floors. The SOPRAWAY NG2 membrane allows the direct application…
View Product
SOPRADRAIN™ ECOVENT
SOPRADRAIN Ecovent is a geometric patterned core drainage mat designed to eliminate hydrostatic pressure on vegetated roofs, foundation walls, retaining…
View ProductRelated Projects
Parkland Hospital – Dallas, Texas
The new hospital featured flat rooftops at multiple levels that all needed to be made watertight for decades to come. The roofing system needed to be designed in a way that accounted for a helipad, consistent rooftop traffic, extensive rooftop equipment, lightwells and various utility platforms. A lot stood in the way of Anchor Roofing, the installer, but the meticulous planning for the project meant that all contingencies had been considered by the time application of the waterproofing system began.
Holiday Inn Express – Medina, Ohio
SOPREMA®’s SOPRASEAL® Stick VP self-adhered vapor-permeable air barrier membrane was installed to ensure a continuous air barrier with no moisture infiltration for this wall assembly requiring a “breathable” characteristic. It creates a solid barrier against air infiltration and exfiltration, which minimizes associated energy loss and condensation problems.