INSONO AF3-90 SKU: 00328
INSONO AF3-90 SKU: 00328
INSONO AF3-90 is composed of self-adhesive elastomeric bitumen with an exposed non-woven polyester reinforcement. The underside is surfaced with a protective release film. INSONO AF3-90 is designed for use under ceramic tiles but can also be installed with wood flooring or vinyl planks. INSONO AF3-90 offers sound damping, crack insolation through a concrete slab and waterproofing.
Product Properties
- Surface Non-woven polyester
- Thickness 90 mils
- Underface Silicone release film
Installation
Prepare surface with INSONO AF3 Primer, ELASTOCOLO Stick H2O or RESISTO H2O Primer, follow drying times indicated on the primer data sheet then install the INSONO AF3-90 membrane. Apply the polymer-modified mortar and install the ceramic tiles. For installations where waterproofing is required, waterproofing strips, such as SOPRASEAL® Stick 1100 must be installed prior to INSONO
AF3-90.
Related Products
SOPRALENE® STICK
SOPRALENE Stick is an SBS-modified bitumen, self-adhered base ply for use in approved multi-ply membrane and flashing assemblies. SOPRALENE Stick…
View Product
ALSAN® COATING SIL 402 FLASHING
ALSAN COATING SIL 402 FLASHING is a VOC compliant, high solids, single component, low sag, silicone mastic used to prepare…
View Product
SENTINEL® VCM
SENTINEL VCM is a 24 gauge (0.6 mm) galvanized steel sheet with a 20 mil SENTINEL PVC membrane laminated to…
View ProductRelated Projects
Pearl Block 136 – Portland, Oregon
For this project, SOPREMA’s SOPRASEAL® product line was selected to provide an airtight barrier. The project was originally specified with another membrane, but due to poor adhesion, our SOPRASEAL Stick VP and SOPRASOLIN® HD products were substituted in.
Mall of Georgia – Buford, GA
The expansive Mall of Georgia is the largest mall in Georgia and one of the largest in all of the United States, consisting of more than two hundred stores on three levels.