SOPREMA

Search

ALSAN® COATING SIL 402 FLASHING SKU: L-SILSS2

ALSAN® COATING SIL 402 FLASHING SKU: L-SILSS2

ALSAN COATING SIL 402 FLASHING is a VOC compliant, high solids, single component, low sag, silicone mastic used to prepare seams, penetrations and fasteners. Upon cure, ALSAN COATING SIL 402 FLASHING forms a durable weatherproof seal, prepping the surface for application of ALSAN COATING SIL 402.

Product Properties

  • Material Flashing

Installation

ALSAN COATING SIL 402 FLASHING can be applied using stiff brush, trowel or putty knife typically in one application.

NOTE: ALSAN COATING SIL 402 FLASHING reacts with atmospheric moisture to cure. Once containers are open and exposed to the atmosphere, a skin will form on the material over time, which must be removed from the bulk material before use.

Please refer to the SOPREMA Roof Coatings Technical Manual for additional application guidelines.

 

Related Products

ALSAN® COATING SIL 402

  ALSAN COATING SIL 402 is a high solids, single component, silicone roof coating and protective barrier for various low-slope…

View Product

POLYFLEECE

POLYFLEECE is a proprietary non-woven polyester reinforcement used in the following waterproofing and flashings: ALSAN Flashing, ALSAN Coating AC 401,…

View Product

ALSAN® COATING BUTYL FLEECE TAPE

ALSAN COATING BUTYL FLEECE TAPE contains a butyl rubber compound with a polyester fleece face used where required or recommended…

View Product

Related Projects

Mall of Georgia – Buford, GA

The expansive Mall of Georgia is the largest mall in Georgia and one of the largest in all of the United States, consisting of more than two hundred stores on three levels.

Lancaster Material Distribution Center – Lancaster, Texas

In May 2017, the Lancaster Material Distribution Center needed a new roof. While the original SOPREMA asphalt system was in decent shape, it was nearly 25 years old and at the end of its life. Through value engineering, it was decided that the existing system would be left in place to save cost. SOPREMA products were selected to re-roof this project due to the proven durability of the existing roof. The system that was installed included ELASTOCOL® 500, COLVENT® Flam, ELASTOPHENE® Flam LS FR GR, SOPRALENE® Flam 180 and SOPRALENE Flam 180 FR GR.