SENTINEL® P200 SKU: P303
SENTINEL® P200 SKU: P303
SENTINEL P200 is a high-performance, bare-backed, thermoplastic polyvinyl chloride (PVC) membrane designed for both steep and low slope applications. SENTINEL P200 is reinforced with a tenacious, anti-wicking, weft-inserted polyester fabric that is encapsulated on both sides with a proprietary thermoplastic PVC formulation. SENTINEL P200 is available in a variety of colors, including white, gray and tan.
Product Properties
- Installation Method Fully Adhered
- Installation Method Mechanically Fastened
- Reinforcement Polyester
- Thickness 80 mils (2.0 mm)
Installation
SENTINEL P200 is applied to approved substrates via mechanically attached, fully adhered or induction welded systems. For fully adhered systems, SENTINEL H2O or SENTINEL S Bonding adhesives are approved. Please refer to the specific product data sheet for application guidelines. For mechanically attached and induction welded systems, please consult your SOPREMA representative for specific fastening patterns. All laps must be heat-welded to ensure a water tight seal.
Testing & Approvals
Related Products
SOPRA-XPS 25 CW
SOPRA-XPS 25CW are rigid thermal insulation boards made of extruded polystyrene closed-cell foam. SOPRA-XPS 25CW is mainly used as thermal…
View Product
SOPRAFIX® #15 HD FASTENER
SOPRAFIX® #15 HD (Heavy Duty) Insulation Fasteners are designed for the attachment of insulation and membrane to steel (18-22 ga.),…
View Product
SOPRASEAL® LM 203
SOPRASEAL LM 203 is a one-component spray applied non-permeable air barrier membrane used in wall construction. SOPRASEAL LM 203 is…
View ProductRelated Projects
Ohio Stadium – Columbus, Ohio
Ohio Stadium is the fourth largest on-campus facility in the nation and the fifth largest stadium in the world. Unique in its double-deck horseshoe design, Ohio Stadium is both intimate and intimidating and only one of many buildings on the OSU campus where SOPREMA products are utilized.
Denver Union Station – Denver, Colorado
When the Denver Union Station was to go through a remodel, SOPREMA’s COLPHENE® BSW product was selected to waterproof the building.
In 2011, SOPREMA met the challenges of waterproofing the building envelope with the COLPHENE BSW system to ensure a seamless watertight solution. Over 170,000 sq ft of COLPHENE BSW was used as a waterproofing membrane.