SOPRALENE® 180 SP 3.5 SKU: 00621
SOPRALENE® 180 SP 3.5 SKU: 00621
SOPRALENE 180 SP 3.5 (sanded, polyolefin) is an SBS-modified bitumen base ply for use in approved multi-ply membrane and flashing assemblies. SOPRALENE 180 SP 3.5 is composed of a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer modified bitumen and is reinforced with a tough, dimensionally stable non-woven polyester mat. The topside is surfaced with fine mineral aggregate and underside is surfaced with polyolefin burn-off film to optimize heat welding.
Product Properties
- ASTM ASTM D6164
- Component Base
- Installation Method Heat Welded
- Reinforcement Polyester
- Thickness (minimum) 130 mils (3.3 mm)
- Thickness (nominal) 138 mils (3.5 mm)
- Topside Sanded
- Underside Burn Off Film
Installation
Prior to installation, unroll SOPRALENE 180 SP 3.5 onto the roof surface and allow to relax. Position SOPRALENE 180 SP 3.5 in desired position and back roll the product. SOPRALENE 180 SP 3.5 is then heat welded to approved substrates. Subsequent approved inter-ply or cap ply membranes are applied to SOPRALENE 180 SP 3.5 via cold adhesive. Refer to the SOPREMA® SBS Roofing Guide for additional application guidelines.
Testing & Approvals
Related Products
SOPRALENE® 180 SANDED
SOPRALENE 180 Sanded is an SBS-modified bitumen base ply for use in approved multi-ply membrane and flashing assemblies. SOPRALENE 180…
View Product
SENTINEL® PVC PROFILE BARS
SENTINEL PVC PROFILE BARS are extruded, pliable PVC bars designed to provide SENTINEL PVC and KEE membranes with the appearance…
View Product
ELASTOPHENE® HS SANDED
ELASTOPHENE HS Sanded (high strength) is an SBS-modified bitumen base ply for use in approved multi-ply membrane and flashing assemblies….
View ProductRelated Projects
Chinese Hospital Outpatient Center – San Francisco, California
SOPREMA’s SENTINEL line was the product of choice for this project because of its proven quality, competitive pricing and superior technical support. Platinum Roofing, the contractor for the project, utilized SENTINEL G150, SENTINEL H2O Bonding Adhesive, SENTINEL VCM, and SENTINEL Prefabricated Corners and Pipe Flashings to complete the roof.
Placer County Water Agency – Auburn, California
In 2015, the Placer County Water Agency took on a tear-off roofing project, in which SOPREMA products were used. SOPREMA was the right choice for this project because the breadth of products met the designer’s needs, including meeting California Title 24 energy efficiency standards with the use of ENERGY STAR® rated SOPRASTAR® Flam. Another appealing aspect was the versatility of SENTINEL® P150, which allowed coverage for the vertical walls throughout the roofing system.