SENTINEL® MOLDED INSIDE CORNERS SKU: P502
SENTINEL® MOLDED INSIDE CORNERS SKU: P502
SENTINEL® Molded Corners are injection molded, unreinforced flashings that are installed to flash 90-degree inside and outside corners. SENTINEL PVC Molded inside and outside corners are white in color.
Product Properties
- Type Membrane Accessories
Installation
SENTINEL® Molded Corners are installed via heat welding. Heat weld each seam using a hot-air welder. Refer to SOPREMA® specifications and installation instructions for additional application guidelines.
Our Other Brands
Related Products
SOPRANATURE® Seam Tape
SOPRANATURE Seam Tape is a high performance, low-residue adhesive seam tape with low water vapor permeance. SOPRANATURE Seam Tape is…
View Product
SOPRASEAL® LM 204 VP
SOPRASEAL LM 204 VP is a one-component, 98% solids content, liquid applied, vapor-permeable air barrier membrane used in wall construction….
View Product
COLPHENE® BARR Flashing
COLPHENE® BARR Flashing is a single component, 100% solids content, liquid applied, moisture-curing elastomeric waterproofing membrane.
View ProductRelated Projects
John R. Oishei Children’s Hospital – Buffalo, New York
SOPREMA’s SOPRASEAL® Xpress G air and vapor barrier was ideal for this project. The exterior grade, inorganic faced gypsum board with an air and vapor barrier factory applied to the exterior surface, is the first and only ABAA evaluated assembly. SOPRASEAL® Xpress G boards are mechanically fastened to the structure using corrosion resistant SOPRASEAL® Xpress G Screws. A 6 inch self-adhered strip of SOPRASEAL® Stick 1100T is then installed over all board joints.
Parkland Hospital – Dallas, Texas
The new hospital featured flat rooftops at multiple levels that all needed to be made watertight for decades to come. The roofing system needed to be designed in a way that accounted for a helipad, consistent rooftop traffic, extensive rooftop equipment, lightwells and various utility platforms. A lot stood in the way of Anchor Roofing, the installer, but the meticulous planning for the project meant that all contingencies had been considered by the time application of the waterproofing system began.