SOPRAFIX® BASE 622 SKU: 00256


SOPRAFIX® BASE 622 SKU: 00256
SOPRAFIX® Base 622 is an SBS-modified bitumen base ply for use in approved multi-ply membrane and flashing assemblies and is designed specifically for mechanical attachment to approved substrates. SOPRAFIX Base 622 is composed of a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer modified bitumen and is reinforced with a tough, dimensionally stable non-woven polyester mat engineered for mechanical attachment. The topside and underside are surfaced with fine mineral aggregate to facilitate subsequent cold adhesive or self adhered application.
Product Properties
- ASTM ASTM D6164
- Component Base
- Installation Method Mechanically Attached
- Reinforcement Polyester
- Thickness 110 mils (2.8 mm)
- Topside Sanded
- Underside Sanded
Installation
Prior to installation, unroll SOPRAFIX Base 622 onto the roof surface and allow to relax. Place SOPRAFIX Base 622 in desired position. SOPRAFIX Base 622 is mechanically fastened through the 4 inch or 5 inch side laps using the 2 inch or 2.4 inch plates respectively following the details for the required uplift pressure. Subsequent approved inter-ply or cap ply membranes are applied to SOPRAFIX Base 622 via cold adhesive or self adhered. Refer to the SOPREMA® SBS Roofing Manual for additional application guidelines.
Testing & Approvals





Related Products
ALSAN Trafik PU 421
ALSAN Trafik PU 421 is a two-component, low odor, aliphatic polyurethane elastomeric topcoat. This topcoat provides excellent adhesion to SOPREMA…
View Product
ALSAN® RS DETAILER
ALSAN® RS Detailer is a micro-fiber enhanced rapid-setting polymethyl methacrylate (PMMA) flashing resin. ALSAN RS Detailer is used for waterproofing…
View Product
ALSAN® COATING SIL 402 FLASHING
ALSAN® Coating SIL 402 Flashing is a VOC compliant, high solids, single component, low sag, silicone mastic used to prepare…
View ProductRelated Projects
Woodridge Middle School – Peninsula, Ohio
With a tight schedule to meet, Woodridge Middle School was relying on SOPREMA’s SENTINEL products to do the job. The previous shingle and PVC roof was replaced with SOPRA-ISO, and tan SENTINEL P150 HFB. The gutters were then lined with ALSAN RS 222 primer and ALSAN RS 230 Flash.
Fishers Island Club – Fishers Island, New York
When it was time to build a new building at the club, SOPREMA products were called into action. On this new building, our COLPHENE® 3000 product was chosen to waterproof the foundation because of its superior strength and adhesion.