ALSAN® RS 230 FLASH SKU: L-RS022S
ALSAN® RS 230 FLASH SKU: L-RS022S
ALSAN RS 230 FLASH is a high-performance, rapidsetting, polymethyl methacrylate (PMMA) liquid resin for use in flashing applications. ALSAN RS 230 FLASH resin is combined with ALSAN RS FLEECE to form a monolithic, self-flashing and self-adhering reinforced waterproofing membrane. ALSAN RS 230 FLASH is available in summer or winter formulations.
Product Properties
- Installation Method 2 Part
- Material Liquid
- Technology PMMA
Installation
Using a slow-speed (200 to 400 rpm) mechanical agitator, thoroughly mix the entire container of resin for two minutes before use. Only catalyze the amount of material that can be used within 10 – 15 minutes. Add the pre-measured catalyst to the resin component and stir for two minutes and apply to the substrate. Refer to the catalyst information found on the second page of this PDS. Apply without dilution or thinning.
After mixing, apply ALSAN RS 230 FLASH to prepared substrate at the required consumption using a roller or brush. The resin should be applied evenly onto the surface using care not to spread too thin or pool in low areas.
Refer to the ALSAN RS Roofing Technical Manual for additional application guidelines.
Testing & Approvals
Related Products
ALSAN® RS Vinyl Chips
ALSAN RS VINYL CHIPS are solid, chemically inert, pigmented acrylic chips used to create decorative aesthetic finishes for ALSAN RS…
View Product
ALSAN® PRE-CUT FLEECE
ALSAN PRE-CUT FLEECE is a polyester fleece reinforcement that is pre-cut to fit typical roofing and waterproofing details. Convenient and…
View Product
SOPRANATURE® SOPRAFILTER
SOPRANATURE SOPRAFILTER is a fabric made of a non-woven needle punched polypropylene and polyester fibers. SOPRANATURE SOPRAFILTER is used as…
View ProductRelated Projects
JP Morgan Chase – New York, New York
JP Morgan Chase turned to SOPREMA for a permanent solution to several unique waterproofing issues. The answer was a fully reinforced, low odor ALSAN RS 260 LO PMA System with a slip resistant surfacing layer that offers a 20 year guaranteed waterproofing solution.
University of Oregon Residence Hall – Eugene, Oregon
With a student population of over 24,000, the University of Oregon was in need of a new residence hall. When selecting an air barrier for the project, it was decided that SOPRASEAL® Stick VP and SOPRASOLIN® HD would be applied.