SOPRALENE® ULTRA-STICK® FR GR SKU: 05020 (WH), 05021 (SG)
SOPRALENE® ULTRA-STICK® FR GR SKU: 05020 (WH), 05021 (SG)
SOPRALENE® ULTRA-STICK® FR GR (fire retardant, granulated) is an SBS-modified bitumen cap ply for use in approved multi-ply membrane and flashing assemblies. SOPRALENE® ULTRA-STICK® FR GR is composed of a proprietary formulation of elastomeric styrene butadiene-styrene (SBS) polymer modified bitumen in combination with a specifically formulated, high tack self-adhesive bottom layer and is reinforced with a tough, dimensionally stable non-woven polyester mat. The topside is surfaced with ceramic coated granules and the underside is surfaced with a protective embossed split back release film that is removed during application.
Product Properties
- ASTM ASTM D6164
- COMPONENT Cap
- INSTALLATION METHOD Self Adhered
- REINFORCEMENT Non-woven Polyester
- Thickness (minimum) 130 mils (3.3 mm)
- THICKNESS (nominal) 138 mils (3.5 mm)
Installation
Prior to installation, unroll SOPRALENE ULTRA-STICK FR GR onto the roof surface and allow to relax. Place SOPRALENE ULTRA-STICK FR GR in desired position. Remove one side of the embossed split back release film and use hand pressure to adhere the exposed high tack bottom layer. Remove the other half of the release film and use a weighted roller to adhere the entire surface of the sheet. Refer to the SOPREMA SBS Roofing guide and additional application guidelines.
Testing & Approvals
Related Products
ELASTOPHENE® ULTRA-STICK
ELASTOPHENE ULTRA-STICK is an SBS-modified bitumen, self-adhered base sheet for use in approved multi-ply membrane and flashing assemblies. ELASTOPHENE ULTRA-STICK…
View Product
ELASTOPHENE® ULTRA-STICK FR GR
ELASTOPHENE ULTRA-STICK FR GR (fire retardant, granulated) is an SBS-modified bitumen cap ply for use in approved multi-ply membrane and…
View Product
SOPRALENE® ULTRA-STICK
SOPRALENE ULTRA-STICK is an SBS-modified bitumen, self-adhered base sheet for use in approved multi-ply membrane and flashing assemblies. SOPRALENE ULTRA-STICK…
View ProductRelated Projects
DFW International Airport – Dallas, Texas
The Dallas Fort Worth International Airport (DFW) became one of the first major U.S. airports to go carbon neutral in 2016, and since then, the facility has only accelerated its sustainability efforts. When ELASTOPHENE® and SOPRALENE® with ECO3 granules were specified for the roofs of DFW’s Terminal F Skylink buildings, it represented a new level of commitment to our planet.
U.S. Treasury Building – Washington DC
The Treasury Building is the oldest departmental building in Washington and has had a great impact on the design of other governmental buildings. At the time of its completion, it was one of the largest office buildings in the world.