SOPREMA

Search

ALSAN® COATING UNIVERSAL PRIMER SKU: L-ACUP

ALSAN® COATING UNIVERSAL PRIMER SKU: L-ACUP

ALSAN Coating Universal Primer is a highly engineered, single component, water-based primer designed for application over aged single plies (TPO, PVC & EPDM) and various common metal substrates like Galvalume, Galvanized Steel, Aluminum, and other common roofing substrates – including difficult to adhere to membranes or surfaces.

Product Properties

  • Material Primer

Installation

ALSAN Coating Universal Primer must be applied to a dry surface free from dust, dirt, debris and water prior to application. Stir thoroughly before application to achieve a uniform consistency. Apply with a brush, paint roller, or spray equipment. Under normal conditions, ALSAN Coating Universal Primer will dry in 2 – 4 hours. Relative humidity and temperature will directly affect drying time. Avoid over application and puddling of material.

An adhesion test should always be performed to ensure adhesion with the substrate. If adhesion is poor contact SOPREMA technical for details.

Apply at a rate of 1.0 gallon per 100 sq. feet per coat dependent upon roof porosity.

Please refer to the SOPREMA Roof Coatings Technical Manual for additional application guidelines.

 

Related Products

ALSAN® COATING SIL 402

  ALSAN Coating SIL 402 is a VOC compliant, high solids, single component, silicone roof coating and protective barrier for…

View Product

ALSAN® COATING SIL 402 FLASHING

ALSAN® Coating SIL 402 Flashing is a VOC compliant, high solids, single component, low sag, silicone mastic used to prepare…

View Product

ALSAN® COATING SIL 402 WALKWAY GRADE

ALSAN Coating SIL 402 Walkway Grade is a safety yellow VOC compliant, high solids, single component, moisture curing, silicone rubber…

View Product

Related Projects

Carrick High School – Pittsburgh, Pennsylvania

In 2017, Carrick High School’s roof was ready to be replaced. It was decided the best option was to tear off the previous roof and start fresh. Due to the relationship the architect, HHSDR Architects / Engineers, has with SOPREMA, the system that was selected to replace the previous roof included: SOPRA-ISO®, SOPRABOARD®,  SOPRALENE® Flam Stick and SOPRALENE FLAM 180 FR GR.

Strongsville Starbucks®- Strongsville, Ohio

Roof Rite, the roofing contractor on the job, brought SOPREMA products into the mix based on the wide product selection and proven past performance.