ALSAN® RS Liquid Thixo is a proprietary thixotropic agent used as an additive with ALSAN RS PMMA & PMA resins to increase resin viscosity. ALSAN RS Liquid Thixo is required with ALSAN RS 230, ALSAN RS 260 LO, ALSAN RS 233 Self-Leveling Mortar, ALSAN RS 263 LO Mortar, ALSAN RS 287 Color Finish Base, ALSAN RS 289 Textured Finish and ALSAN RS Textured Coating when applied on steep slopes or vertical substrates.

Product Properties

  • Material Liquid


For vertical substrates or slopes exceeding 1-1/2 : 12, pre-mix the required ALSAN RS resin with ALSAN RS Liquid Thixo at up to 2% addition by weight. The amount of thixotropic additive needed will vary by slope and temperature. Test the amount of ALSAN RS Liquid Thixo required by mixing small batches before mixing entire units of product. Resin mixed with ALSAN RS Liquid Thixo must be allowed to stand 20 to 30-minutes before use. ALSAN RS Liquid Thixo can be measured using a standard tablespoon (TBSP), where 1 level TBSP
is approximately 20g (0.02kg) or 2% addition. Note: storage and working times of ALSAN RS resins are not affected by addition of ALSAN RS Liquid Thixo. Prior to use or application, refer to published specifications, guidelines and recommendations for complete application instructions for the specific ALSAN RS resin being used. The applicator is responsible for ensuring conditions are appropriate to proceed with proper application methods.


Our Other Brands

Related Products


SOPRAFLASH™ R is a lightweight, thermally bonded spun laid polyester/nylon composite mat. SOPRAFLASH R is used as a reinforcement in…

View Product


SENTINEL® Copper Art P150 HFB is a high performance, polyester reinforced, thermoplastic polyvinyl chloride (PVC) roof membrane, specially designed to…

View Product

SOPRA-TITE Cantilever Coping

SOPRA-TITE Cantilever Coping is designed for attachment to a parapet wall with a non-structural exterior building façade. Support brackets offer…

View Product

Related Projects

Pearl Block 136 – Portland, Oregon

For this project, SOPREMA’s SOPRASEAL® product line was selected to provide an airtight barrier. The project was originally specified with another membrane, but due to poor adhesion, our SOPRASEAL Stick VP and SOPRASOLIN® HD products were substituted in.

Assurant Building – Miami, Florida

In 2015, Assurant, a risk management solutions company, was in need of a full re-roof on their 92,180 square foot building. When searching for a roofing solution that met all codes and requirements, it was decided that a modified bitumen three ply roof system with a SOPRASTAR® cap ply would replace the existing roof. The SOPRASTAR® cap ply membrane easily met both the Miami- Dade code and Factory Mutual (FM) guidelines, making it one less concern.