SOPREMA

Search

ELASTOPHENE® FLAM STICK SKU: 00570

ELASTOPHENE® FLAM STICK SKU: 00570

ELASTOPHENE® Flam Stick is an SBS-modified bitumen, self-adhered base ply for use in approved multi-ply membrane and flashing assemblies. ELASTOPHENE Flam Stick is composed of a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer modified bitumen in combination with a high tack self-adhesive layer and is reinforced with a high quality random glass fiber mat. The topside is surfaced with polyolefin burn-off film to optimize heat welding and the underside is surfaced with protective polyolefin release film that is removed during application.

Product Properties

  • ASTM ASTM D6163
  • Component Base
  • Installation Method Self Adhered
  • Reinforcement Glass Fiber
  • Thickness (minimum) 79 mils (2.0 mm)
  • Thickness (nominal) 87 mils (2.2 mm)
  • Topside Burn Off Film
  • Underside Self Adhered

Installation

Prior to installation, unroll ELASTOPHENE Flam Stick onto the roof surface and allow to relax. Place ELASTOPHENE Flam Stick in desired position. Remove the protective release film from the underside of the sheet and roll ELASTOPHENE Flam Stick into place with a weighted roller. Subsequent approved inter-ply or cap ply membranes are applied to ELASTOPHENE Flam Stick via heat welding. Refer to the SOPREMA SBS Roofing Manual for additional application guidelines.

 

Testing & Approvals

Related Products

ALSAN TRAFIK EP 140

ALSAN Trafik EP 140 is a two-component, high solids, low odor, liquid applied epoxy primer. This primer provides excellent adhesion…

View Product

ELASTOPHENE® PS 3.0

ELASTOPHENE® PS 3.0 is an SBS-modified bitumen base ply for use in approved multi-ply membrane and flashing assemblies. ELASTOPHENE PS…

View Product

SBL HP Flashing Cement

SBL HP (High Performance) Flashing Cement is a trowel grade elastic, rubberized roof flashing cement. It is composed of a…

View Product

Related Projects

Garibaldi Square Condos – Chicago, Illinois

This award winning project is the direct result of the building owner’s resistance to using hot asphalt and torches on the roof. SOPREMA’s mechanically attached, self-adhered system was used to accommodate the building owner’s desires.

Boston Prudential Tower – Boston Massachusetts

“With SOPREMA®, we knew we were assured of experience, quality and a solid reputation,” states Jim Justus. “SOPREMA’s multi-ply system provided superior puncture and tear resistance and their past history indicated the products would exceed the owner’s requirements.