Search

ELASTOPHENE® SANDED 2.2 SKU: 00206

ELASTOPHENE® SANDED 2.2 SKU: 00206

ELASTOPHENE® Sanded 2.2 is an SBS-modified bitumen base ply for use in approved multi-ply membrane and flashing assemblies. ELASTOPHENE Sanded 2.2 is composed of a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer modified bitumen and is reinforced with a high quality random glass fiber mat. The topside and underside are surfaced with fine mineral aggregate to facilitate cold adhesive and hot asphalt applications.

Product Properties

  • ASTM ASTM D6163
  • Component Base
  • Installation Method Cold Adhered, Asphalt Adhered
  • Reinforcement Glass Fiber
  • Thickness (minimum) 79 mils (2.0 mm)
  • Thickness (nominal) 87 mils (2.2 mm)
  • Topside Sanded
  • Underside Sanded

Installation

Prior to installation, unroll ELASTOPHENE Sanded 2.2 onto the roof surface and allow to relax. Place ELASTOPHENE Sanded 2.2 in desired position and back roll the product. Apply approved cold adhesive or hot asphalt following manufacturer’s guidelines. ELASTOPHENE Sanded 2.2 is then rolled into the cold adhesive or hot asphalt and subsequently rolled with a weighted roller. Subsequent approved inter-ply or cap ply membranes are applied to ELASTOPHENE Sanded 2.2 via cold adhesive or hot asphalt. Refer to the SOPREMA SBS Roofing Manual for additional application guidelines.

 

Related Products

TRI-FIXX™ FASTENING SYSTEM

The TriFixx™ Fastening System is a plate/nail combination that is utilized for mechanically attaching SOPREMA™ membranes to lightweight insulating concrete…

View Product

SOPRADRAIN™ 100

SOPRADRAIN 100 is a versatile workhorse that delivers first-rate protection for waterproofing systems. Faced with a non-woven fabric layer, this…

View Product

SOPRALENE® 180 SANDED 2.2

SOPRALENE 180 Sanded 2.2 is an SBS-modified bitumen base ply for use in approved multi-ply membrane and flashing assemblies. SOPRALENE…

View Product

Related Projects

Parkland Hospital – Dallas, Texas

The new hospital featured flat rooftops at multiple levels that all needed to be made watertight for decades to come. The roofing system needed to be designed in a way that accounted for a helipad, consistent rooftop traffic, extensive rooftop equipment, lightwells and various utility platforms. A lot stood in the way of Anchor Roofing, the installer, but the meticulous planning for the project meant that all contingencies had been considered by the time application of the waterproofing system began.

Flores De La Playa Condominium – Satellite Beach, Florida

When selecting a product to re-roof the building after the storm, it was important to select a product that would be able to withstand the impact of future tropical storms and hurricanes. The system that was selected included a base ply of ELASTOPHENE® SP 3.0 with 350 PSI lightweight concrete applied on top and SOPRALENE® 180 PS 3.0 with a cap sheet of SOPRALENE Flam 180 FR GR.