ALSAN® RS 222 Primer SKU: L-RS001
ALSAN® RS 222 Primer SKU: L-RS001
ALSAN RS 222 PRIMER is a rapid-setting, proprietary formulation polymethyl methacrylate (PMMA) primer. ALSAN RS 222 PRIMER is used to promote adhesion of ALSAN RS roofing components to approved substrates. ALSAN RS 222 PRIMER is also provides excellent resistance to asphalt bleed through.
Product Properties
- Overlying Application ALSAN RS
Installation
Using a slow-speed (200 to 400 rpm) mechanical agitator, thoroughly mix the entire container of resin for two minutes before use. Only catalyze the amount of material that can be used within 10-15 minutes. Add the pre-measured catalyst to the resin component and stir for two minutes and apply to the substrate. Refer to the catalyst information found on the second page of the PDS. Apply without dilution or thinning.
After mixing, apply ALSAN RS 222 PRIMER to substrate at the required consumption using a 3/8 in nap roller or brush. The resin should be applied evenly onto the surface using care not to spread too thin or pool in low areas.
Refer to the ALSAN RS Roofing Technical Manual for additional application guidelines.
Testing & Approvals
Related Products
ALSAN® RS 260 LO FIELD
ALSAN RS 260 LO FIELD is a high-performance, low odor, rapid-setting, polymethacrylate (PMA) liquid resin. ALSAN RS 260 LO FIELD…
View Product
SOPRALENE® 180 SP 3.5
SOPRALENE 180 SP 3.5 (sanded, polyolefin) is an SBS-modified bitumen base ply for use in approved multi-ply membrane and flashing…
View Product
SOPRALENE® FLAM 180
SOPRALENE® Flam 180 is an SBS-modified bitumen base ply for use in approved multi-ply membrane and flashing assemblies. SOPRALENE Flam…
View ProductRelated Projects
MODE Apartments – Chicago, Illinois
The MODE Apartments located in Logan Square, just northwest of downtown Chicago, offers residents luxurious living both inside and out. SOPREMA’s SOPRANATURE® product line was used to develop the private patios and common areas that are available to residents.
The Westin Savannah Harbor – Savannah, Georgia
The Westin was due for a roof replacement on 17,828 square feet of its property. To complete the project, SOPREMA’s SOPRAISO ™, DUOTACK®, SENTINEL® P-150, and ALSAN® RS 230 Flash were selected. These products allowed for the design to meet FM 1-120 codes and the use of ALSAN RS 230 Flash solved any difficult flashing details which was only one of many reasons
SOPREMA products were selected.