ELASTOPHENE® FLAM STICKSKU: 00570

ELASTOPHENE® Flam Stick is an SBS-modified bitumen, self-adhered base ply for use in approved multi-ply membrane and flashing assemblies. ELASTOPHENE Flam Stick is composed of a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer modified bitumen in combination with a high tack self-adhesive layer and is reinforced with a high quality random glass fiber mat. The topside is surfaced with polyolefin burn-off film to optimize heat welding and the underside is surfaced with protective polyolefin release film that is removed during application.

Product Properties

  • ASTM ASTM D6163
  • Component Base
  • Installation Method Self Adhered
  • Reinforcement Glass Fiber
  • Thickness 87 mils (2.2 mm)
  • Topside Burn Off Film
  • Underside Self Adhered

Installation

Prior to installation, unroll ELASTOPHENE Flam Stick onto the roof surface and allow to relax. Place ELASTOPHENE Flam Stick in desired position. Remove the protective release film from the underside of the sheet and roll ELASTOPHENE Flam Stick into place with a weighted roller. Subsequent approved inter-ply or cap ply membranes are applied to ELASTOPHENE Flam Stick via heat welding. Refer to the SOPREMA SBS Roofing Manual for additional application guidelines.

Testing & Approvals

FBC FL3915-R15  Modified Bitumen Roof Systems FM UL

Share this page