ELASTOPHENE® SANDED 2.2 SKU: 00206
ELASTOPHENE® SANDED 2.2 SKU: 00206
ELASTOPHENE® Sanded 2.2 is an SBS-modified bitumen base ply for use in approved multi-ply membrane and flashing assemblies. ELASTOPHENE Sanded 2.2 is composed of a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer modified bitumen and is reinforced with a high quality random glass fiber mat. The topside and underside are surfaced with fine mineral aggregate to facilitate cold adhesive and hot asphalt applications.
Product Properties
- ASTM ASTM D6163
- Component Base
- Installation Method Cold Adhered, Asphalt Adhered
- Reinforcement Glass Fiber
- Thickness (minimum) 79 mils (2.0 mm)
- Thickness (nominal) 87 mils (2.2 mm)
- Topside Sanded
- Underside Sanded
Installation
Prior to installation, unroll ELASTOPHENE Sanded 2.2 onto the roof surface and allow to relax. Place ELASTOPHENE Sanded 2.2 in desired position and back roll the product. Apply approved cold adhesive or hot asphalt following manufacturer’s guidelines. ELASTOPHENE Sanded 2.2 is then rolled into the cold adhesive or hot asphalt and subsequently rolled with a weighted roller. Subsequent approved inter-ply or cap ply membranes are applied to ELASTOPHENE Sanded 2.2 via cold adhesive or hot asphalt. Refer to the SOPREMA SBS Roofing Manual for additional application guidelines.
Related Products
SOPRA-XPS 25 CW
SOPRA-XPS 25CW are rigid thermal insulation boards made of extruded polystyrene closed-cell foam. SOPRA-XPS 25CW is mainly used as thermal…
View Product
SOPRA-XPS 60
SOPRA-XPS 60 are rigid thermal insulation boards made of extruded polystyrene closed-cell foam. It is mainly used for SOPREMA foundation…
View ProductSOPRA-XPS 100
SOPRA-XPS 100 are rigid thermal insulation boards made of extruded polystyrene closed-cell foam. It is mainly used for SOPREMA foundation…
View ProductRelated Projects
Fayetteville Area System of Transit Multimodal Project – Fayetteville, North Carolina
The original design selected for the center left the project over budget, so the contractor and architect had to go back to the drawing board. After researching additional options, both Baker Roofing and Gantt Huberman Architects felt very comfortable with SOPREMA’s proven history and the ability to meet the Buy American requirement, so they selected the SENTINEL® line for the project.
Museum of the American Revolution – Philadelphia, Pennsylvania
Multiple SOPREMA products ranging from ELASTOPHENE® Flam to the SOPRANATURE® vegetated roofing system were used to complete this project. The Museum of the American Revolution is unique in the fact that it has an exposed SBS roof membrane, extensive vegetated roofs, terrace roofs with pavers and even has some vegetated wall systems. The building resembles 1800’s architecture with a modern flare.