SOPRALENE® 180 FR GR SKU: 01365
SOPRALENE® 180 FR GR SKU: 01365
SOPRALENE 180 FR GR (fire retardant, granulated) is an SBS-modified bitumen cap ply for use in approved multi-ply membrane and flashing assemblies. SOPRALENE 180 FR GR is composed of a proprietary formulation of elastomeric styrene-butadienestyrene (SBS) polymer modified bitumen and is reinforced with a tough, dimensionally stable non-woven polyester mat. The topside is surfaced with ceramic coated granules and the underside is surfaced with fine mineral aggregate to facilitate cold adhesive application.
Product Properties
- ASTM ASTM D6164
- Component Cap
- Installation Method Cold Adhered, Asphalt Adhered
- Reinforcement Polyester
- Thickness (minimum) 150 mils (3.8 mm)
- Thickness (nominal) 157 mils (4.0 mm)
- Topside Granules
- Underside Sanded
Installation
Prior to installation, unroll SOPRALENE 180 FR GR onto the roof surface and allow to relax. Place SOPRALENE 180 FR GR in desired position and back roll the product. Apply approved cold adhesive following manufacturer specifications. SOPRALENE 180 FR GR is then rolled into the cold adhesive and subsequently broomed in. Refer to the SOPREMA SBS Roofing Installation Guide for additional application guidelines.
Testing & Approvals
Related Products
TECSOUND CLG 5900
This one-component acrylic sealant is used to fill the unseen gaps and joints where the wall meets the floor or…
View Product
SOPRAFIX® MBBR BATTEN BAR
SOPRAFIX® MBBR Batten Bar (Metal Batten Bar Recessed) is a flat, nominal 1 inch wide AZ55 Galvalume metal bar with…
View Product
COLPHENE® LM BARR Spray
COLPHENE LM BARR Spray is a single component, 95% solids content, liquid applied, moisture curing elastomeric waterproofing membrane. COLPHENE LM…
View ProductRelated Projects
Flores De La Playa Condominium – Satellite Beach, Florida
When selecting a product to re-roof the building after the storm, it was important to select a product that would be able to withstand the impact of future tropical storms and hurricanes. The system that was selected included a base ply of ELASTOPHENE® SP 3.0 with 350 PSI lightweight concrete applied on top and SOPRALENE® 180 PS 3.0 with a cap sheet of SOPRALENE Flam 180 FR GR.