SOPRA-ISO is a rigid polyisocyanurate thermal insulation panel for use in approved multi-ply membrane and flashing assemblies. SOPRA-ISO is composed of closed cell polyisocyanurate foam bonded to fiber reinforced/organic mat facers on the top and underside. Available in both board stock and tapered panels.
- Material Polyisocyanurate
- Use Insulation
Prior to installation, ensure all SOPRA-ISO panels have not been subject to moisture. Place SOPRA-ISO in an offset or staggered pattern to ensure board joints are not overlapping in multilayer assemblies. Apply to approved substrate via DUOTACK adhesive following manufacturer specifications. SOPRA-ISO may also be mechanically fastened to approved substrates. Refer to the SOPREMA SBS Roofing Guide for additional application guidelines.
SENTINEL® MOLDED OUTSIDE CORNERS
SENTINEL® Molded Corners are injection molded, unreinforced flashings that are installed to flash 90-degree inside and outside corners. SENTINEL PVC…View Product
Flores De La Playa Condominium – Satellite Beach, Florida
When selecting a product to re-roof the building after the storm, it was important to select a product that would be able to withstand the impact of future tropical storms and hurricanes. The system that was selected included a base ply of ELASTOPHENE® SP 3.0 with 350 PSI lightweight concrete applied on top and SOPRALENE® 180 PS 3.0 with a cap sheet of SOPRALENE Flam 180 FR GR.
Flatiron Building – New York, New York
The Flatiron Building is a triangular 22-story, steel-framed building located at 175 Fifth Avenue in the borough of Manhattan, and is considered to be a ground-breaking skyscraper.