SOPREMA

Search

SOPRALENE® 180 PS 2.2 SKU: 00569

SOPRALENE® 180 PS 2.2 SKU: 00569

SOPRALENE 180 PS 2.2 is an SBS-modified bitumen base ply for use in approved multi-ply membrane and flashing assemblies. SOPRALENE 180 PS 2.2 is composed of a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer modified bitumen and is reinforced with tough, dimensionally stable non-woven polyester mat. The topside is surfaced with polyolefin (P) burn-off film and the underside is surfaced with fine mineral aggregate (S) to facilitate cold adhesive application.

Product Properties

  • ASTM ASTM D6164
  • Component Base
  • Installation Method Cold Adhered, Asphalt Adhered
  • Reinforcement Polyester
  • Thickness 91 (2.3 mm)
  • Topside Burn Off Film
  • Underside Sanded

Installation

Prior to installation, unroll SOPRALENE 180 PS 2.2 onto the roof surface and allow to relax. Place SOPRALENE 180 PS 2.2 in desired position and back roll the product. Apply approved cold adhesive following manufacturer specifications. SOPRALENE 180 PS 2.2 is then rolled into the cold adhesive and subsequently rolled with a weighted roller. Subsequent approved inter-ply or cap ply membranes are applied to SOPRALENE 180 PS 2.2 via heat welding. Refer to the SOPREMA SBS Roofing Guide for additional application guidelines.

 

Testing & Approvals

Our Other Brands

Related Products

SOPREMA® Modified Drip Edge

SOPREMA® Modified Drip Edge is engineered with an interlocking, concealed splice plate designed to prevent splice plate migration under the…

View Product

SOPRALAP™ SP

SOPRALAP™ SP is an SBS-modified bitumen cover strip for use with SOPRASMART® Laminated Board products. SOPRALAP SP is composed of…

View Product

SOPRASEAL® Stick VP

SOPRASEAL Stick VP is a self-adhered vapor-permeable air barrier membrane used in wall construction. SOPRASEAL Stick VP is composed of…

View Product

Related Projects

University of Oregon Residence Hall – Eugene, Oregon

With a student population of over 24,000, the University of Oregon was in need of a new residence hall. When selecting an air barrier for the project, it was decided that SOPRASEAL® Stick VP and SOPRASOLIN® HD would be applied.

Indiana War Memorial – Indianapolis, Indiana

The Indiana War Memorial has had leak issues since its construction in 1924. The leak issues were addressed by using SOPREMA’s ALSAN® TRAFIK HP and SOPRALENE® Flam 180 & 250 membranes. The Memorial is no longer leaking.