SOPRALENE® 180 SANDED 2.2 SKU: 00568
SOPRALENE® 180 SANDED 2.2 SKU: 00568
SOPRALENE 180 Sanded 2.2 is an SBS-modified bitumen base ply for use in approved multi-ply membrane and flashing assemblies. SOPRALENE 180 Sanded 2.2 is composed of a proprietary formulation of elastomeric styrene-butadiene-styrene (SBS) polymer modified bitumen and is reinforced with a tough, dimensionally stable non-woven polyester mat. The topside and underside are surfaced with fine mineral aggregate to facilitate cold adhesive application.
Product Properties
- ASTM ASTM D6164
- Component Base
- Installation Method Cold Adhered, Asphalt Adhered
- Reinforcement Polyester
- Thickness (minimum) 87 mils (2.2 mm)
- Thickness (nominal) 94 mils (2.4 mm)
- Topside Sanded
- Underside Sanded
Installation
Prior to installation, unroll SOPRALENE 180 Sanded 2.2 onto the roof surface and allow to relax. Place SOPRALENE 180 Sanded 2.2 in desired position and back roll the product. Apply approved cold adhesive following manufacturer’s guidelines. SOPRALENE 180 Sanded 2.2 is then rolled into the cold adhesive subsequently rolled with a weighted roller. Subsequent approved inter-ply or cap ply membranes are applied to SOPRALENE 180 Sanded 2.2 via cold adhesive. Refer to the SOPREMA® SBS Roofing Guide for additional application guidelines.
Testing & Approvals
Related Products
SOPRAJOINT PLUS 125
SOPRAJOINT PLUS 125 is a monolithic expansion joint made of EPDM-based synthetic rubber, consisting of two flanges coated on the…
View Product
ALSAN TRAFIK EP 141
ALSAN TRAFIK EP 141 is a two-component, high solids, low odor, liquid applied epoxy primer. This primer provides excellent adhesion…
View Product
SOPRADRAIN™ ECOVENT 2
SOPRADRAIN ECOVENT 2 is a geometric patterned core drainage mat designed to eliminate hydrostatic pressure on vegetated roofs, foundation walls,…
View ProductRelated Projects
Michigan State University – East Lansing, Michigan
The facilities management staff at Michigan State University is responsible for over 17,000,000 sq.ft. of roofs. When the staff determines that a re-roof of one of the 580 buildings on campus is necessary, options are limited to known and trusted manufacturers that offer systems with superior in-field performance, such as SOPREMA.
Strongsville Starbucks®- Strongsville, Ohio
Roof Rite, the roofing contractor on the job, brought SOPREMA products into the mix based on the wide product selection and proven past performance.